Vubiq Networks Inc. V10G-L Manual De Usuario
56
Vubiq HaulPass V10g User Manual
© 2018 Vubiq Networks, Inc. All Rights Reserved
If restricted TCN is enabled it causes the port not to propagate received topology change notifications and topology
changes to other ports. If set, it can cause temporary loss of connectivity after changes in a spanning tree's active
topology as a result of persistently incorrect learned station location information. It is set by a network administrator
to prevent bridges external to a core region of the network, causing address flushing in that region, possibly
because those bridges are not under the full control of the administrator or the physical link state of the attached
LANs transits frequently.
changes to other ports. If set, it can cause temporary loss of connectivity after changes in a spanning tree's active
topology as a result of persistently incorrect learned station location information. It is set by a network administrator
to prevent bridges external to a core region of the network, causing address flushing in that region, possibly
because those bridges are not under the full control of the administrator or the physical link state of the attached
LANs transits frequently.
BPDU Guard
This feature is activatd the following ICLI command.
(config-if)# [no] spanning-tree bpdu-guard
If enabled it causes the port to disable itself upon receiving valid BPDU's. Contrary to the similar bridge setting, the
portEdgestatus does not affect this setting.
portEdgestatus does not affect this setting.
Point-to-Point
This feature is activated by the following ICLI command.
(config-if)# [no] spanning-tree link-type {auto|point-to-point|shared}
where the no form is equivalent to setting it to auto.
Setting the link to point-to-point, shows up in the web GUI as Forced True. Setting it to shared, is shown as Force
False. Setting it to auto shows as Auto.
False. Setting it to auto shows as Auto.
9.5 MSTI Ports
The user must select which MSTI configuration to view starting at Configuration > Spanning Tree > MSTI Ports.
Figure 39. MSTI Port Configuration
Select the desired MSTI and click Get.