Vubiq Networks Inc. V10G-L Manual De Usuario
41
Vubiq HaulPass V10g User Manual
© 2018 Vubiq Networks, Inc. All Rights Reserved
Figure 22. VLAN PVID Configuration (Access)
CLI example
– Set Port VLAN to 2 on the second Gigabit port (configured as trunk mode):
# configure terminal
(config)# interface GigabitEthernet 1/2
(config-if)# switchport mode trunk
(config-if)# switchport trunk native vlan 2
(config-if)# exit
(config)# exit
#
(config)# interface GigabitEthernet 1/2
(config-if)# switchport mode trunk
(config-if)# switchport trunk native vlan 2
(config-if)# exit
(config)# exit
#
CLI example: Set Port VLAN to 2 on the second Gigabit port (configured as hybrid mode)
# configure terminal
(config)# interface GigabitEthernet 1/2
(config-if)# switchport mode hybrid
(config-if)# switchport hybrid native vlan 2
(config-if)# exit
(config)# exit
#
(config)# interface GigabitEthernet 1/2
(config-if)# switchport mode hybrid
(config-if)# switchport hybrid native vlan 2
(config-if)# exit
(config)# exit
#
Figure 23. VLAN PVID Configuration (Hybrid)
Port Type
Ports in hybrid mode allow for changing the port type, that is, whether a frame's VLAN tag is used to classify the
frame on ingress to a particular VLAN, and if so, which TPID it reacts on. Likewise, on egress, the port type
determines the TPID of the tag, if a tag is required.
frame on ingress to a particular VLAN, and if so, which TPID it reacts on. Likewise, on egress, the port type
determines the TPID of the tag, if a tag is required.