Creative Distribution Automation Co. Ltd. HS-3 Manual De Usuario
3
DXE", or other corresponding software program, this manual is based on
"RF002. DXE".
3.2 Press confirm button to enter the main interface, press the up and down key
to select functions; Press the left and right key can flip directly; Press
numeric keys 0 to 9 can select the previous first 10 functions directly.
3.3 Software operation process
1) Select the "Search Device"
2) Set parameters
3) Wait for the search operation is completed
4) Select a device, and then back to the main interface to select the corresponding operation
5) Related operations
6) Wait for the response and see
3.4 Need to set the parameters first, before the "Search Device" operation．
1) The setting of the call time (seconds) :
Indicator set 150, sub station FLS - ST/A1 set 5, sub station RF001 - D1 set 2;
2) Wait time (seconds): After the completion of the search when don't do anything to keep
the state of the wireless communication time, usually 45 s;
3) Calling distance (m): setting the distance between the equipment and peripheral
equipment;
4) Call channel: frequency range is 1 ~ 14; (indicator, its own frequency + 1);
5) Communication channel: frequency range of 1 ~ 15;
6) Supplement: if use magnet trigger, call time is 0, any call channel, the communication
channel is 15;
3.5 Every terminal have a complete assembly, test and inspection, and carefully
check and adjustment, insuring the are in good condition for shipping , before
they leave the factory. After receiving the products, please check carefully. If
you have questions, please submit written reports to the carrier immediately.
3.6 Products should be carefully handled when loading and unloading, avoid
collision and impact. Product transportation should be paid attention to
waterproof, forbidden in the same car trunk transport corrosive goods and
packaging. If the equipment before installation to deposit a long time, should
be put in clean, well ventilated place, and shall not contain corrosive gases in
the air.