VoxMicro LTD. AFX-QCA6174 Manual De Usuario
Advanced Status Information
I
I
I
Click the
Advanced
button on the Current Status tab of the Atheros Client Utility to see
advanced information about the program and its operations. The Current Status tab does
not require any configuration. The following table describes the items found on the
Advanced Status screen.
Network Name (SSID)
Displays the wireless network name.
Configure the network name on the General tab.
Server Based
Shows whether server based authentication is used.
Authentication
Data Encryption
Displays the encryption type the driver is using.
Configure the
encryption type on the Security tab.
Authentication Type
Displays the authentication mode.
Configure the authentication mode on the General tab.
Message Integrity
Shows whether MIC is enabled. MIC prevents bit-flip attacks on
Check
encrypted packets.
Associated AP Name
Displays the name of the access point the wireless adapter is
associated to.
Associated AP IP
Shows the IP address of the access point the wireless adapter is
Address
associated to.
Associated AP MAC
Displays the MAC address of the access point the wireless
Address
adapter is associated to.
Power Save Mode
Shows the power save mode. Power management is disabled in
ad hoc mode.
Configure the power save mode on the Advanced tab.
Current Power Level
I
Displays the transmit power level rate in mW.
Current Signal Strength
I
shows the current signal strength in dBm.
Current Noise Level
I
Displays the current noise level in dBm.
Up Time
Shows how long the client adapter has been receiving power (in
hours:minutes:seconds). If the adapter runs for more than 24
hours, the display shows in days:hours:minutes:seconds.
802.11 b Preamble
Displays the 802.llb preamble format.
Configure the preamble format on the Advanced tab.
Current Receive Rate
I
shows the current receive rate in Mbps.
Current Transmit Rate
I
Displays the current transmit rate in Mbps.
Channel
I
shows the currently connected channel.