GENIUS TOY TAIWAN CO. LTD GC258006 Manual De Usuario

1.  Press the motors command icon and the motor

programming window appears (D).

2.  In the motor programming window, you can

create a command to control motor one (blue)
and/or motor two (red) to turn forward or
backward. You can choose a relative speed from
-4 (fastest in one direction) to 4 (fastest in the
other direction).

Note: A positive speed (1-4) in the motor command 
doesn’t always mean your model will move 
forward! You will have to test which direction 
results in the desired output direction on your 
specific models, because the orientation of the 
motor and the gearing will change the direction. 

3.  With the time slider (E), you can also set the

duration for which the motor(s) will turn, from 0.5
to 5.0 seconds.

4.  When you are satisfied with your selections, press

the green check mark bu+on and the motor block
(F) appears in the program segment.

The blocks show which motor(s) (G) the command 
will turn, and at what speed and in what direction 
(H) each motor will turn. Below that, it shows
how long the motor(s) will turn (I).

The blue gear wheel represents motor one and the 
red gear wheel represents motor two. 

Tip! Add red and blue dots or stickers to the ba+ery 
box and motors so you can easily keep track of 
which motor you are programming.

5.  You can add more command blocks to the same

segment by pressing the “+” bu+on (B) again.

D

G

H

Motor 
indicator 
dots

E

F

I

Robotics Smart Machines Manual Inside.indd   10

6/1/15   2:43 PM