Zhuhai Pantum Electronics Co. Ltd 5103MFP Manual De Usuario

Descargar
Página de 103
6.Web server
You can manage printer setup via the embedded Web server.
6.1.Visit the embedded Web server
1. Turn on the power of printer and computer.
2. Connect the printer to network to ensure that the printer is connected to the network where the computer is connected to (please refer to 
Chapter 4
 or 
Chapter 5
 for
network setup method).
3. Input the IP address of printer in the address bar of Web browser to visit the Web server imbedded in printer.
View the IP address of printer via control panel (please refer to 
Chapter 12.3
) or print the “NetConf Pg” out to view the IP Address of printer (please refer to 
Chapter
12.4
).
Note
• Windows users are suggested to use Microsoft Internet Explorer 8.0 (or higher version) or Firefox 1.0 (or higher version), Mac users are suggested
to use Safari 4.0 (or higher version). No matter what kind of browser you are suing, please ensure that JavaScript and Cookies are always enabled.
Please ensure compatibility with HTTP 1.0 and HTTP 1.1 when other network browsers are used.
• If the computer cannot visit the Web server embedded in printer, then your computer and printer may be connected to different networks. Please
inspect your network environment or consult your network administrator.
4. Click “Log in” option, input user name and password (the default user name is admin and the initial password is 000000) and click “Log in”.
Note
• For safety reasons, you are suggested to change the default password, which can be finished in the “User Management” interface.
6.2.Use Web server to manage printer
You can use the embedded Web server to manage printer.
1. View the basic information including product name, printer state and ink cartridge of printer.
2. Set up the network protocol parameters supported by printer.
3. Set up the wireless network connection of printer, and turn on/off wireless network and Wi-Fi Direct function.
4. Set up mail server client and acquire printer state via E-mail notification.
5. It supports to configure e-mail address and FTP address to scan the file to be scanned directly to E-mail box or FTP server.
6.2.1.IP address setup
You need to connect your printer to network before IP address setup.
1. In case of wired network model, connect the printer to wired network by connecting to its network interface with network cable.
2. In case of wireless network model, the printer can be connected to wireless network via wireless network setup tools or Wi-Fi Protected Setup(WPS) (please refer to
Chapter 5.1
).
6.2.1.1.IPv4 setup