HP XZ949UT Manual De Usuario

High Definition Audio

Type

Integrated

HD Stereo Codec

Realtek 2-channel ALC261 codec

Audio I/O Ports

Front microphone-In (150-K ohm Input Impedance)

Rear Line-In/Microphone input (150-K ohm Input Impedance, function is configurable by audio driver)

Rear Line-Out

(190 ohms Output Impedance, expects at least a 10-K ohm load)

Front Headphone-Out (0.5 Ohm Output Impedance, expects at least a 32 ohm load)
Front Microphone/Headphone jack is re-task able to provide Microphone input, line-in or Headphone
output to support connecting two headphones to the front of the system. When configured as a second
front headphone output, both front headphone outputs are always driven with the same signal.

All ports are 3.5 mm

Internal Speaker Amplifier

Internal Speaker Amplifier 1.5W amplifier for the internal speaker only. External speakers must be powered externally. Rear Line-in

audio port is re-taskable as either Line-in or Microphone-In.

Multi-streaming Capable

Multi-streaming Capable Multi-streaming can be enabled in the Realtek control panel to allow independent audio streams to be

sent to/from the front and rear jacks.

Sampling

8 kHz - 192 kHz

Wavetable Syntheses

Yes - Uses OS soft wavetable

Analog Audio

Yes

# of Channels on Line-

# of Channels on Line-
Out

Out

Stereo (Left & Right channels)

Internal Speaker

Yes

External Speaker Jack

Yes

QuickSpecs

HP SignagePlayer mp8200 Series

Technical Specifications - Audio

DA - 14115 North America — Version 2 — October 28, 2011

Page 14