Shenzhen Ruijiahua Technology CO. LTD N1604IAEB25 Manual De Usuario

+

VOL

PAIR

1.  Power on the unit by sliding the Power Switch 

to the ON position, and press and hold the 

Play/Pause/Speakerphone/Pair button for 

approximately 7 seconds. When pairing, remain 
within 3 feet of the unit. 

2.  Using the controls on your Bluetooth device, 

select IAEB25 in your Bluetooth settings to pair. If 
your device requests  
a password, enter the default password  

3.  Refer to the user’s manual for your specific device 

for instructions on pairing and connecting 
Bluetooth devices. After initial pairing, the unit 
will stay paired unless unpaired manually by the 
user or erased due to a reset of the device.  
 
If your device should become unpaired or you find it 
is unable to connect, repeat the above steps.

Power On

Flashing blue light

Low Battery

Flashing red light

Charging

Red light

Finished Charging

Light OFF

Pairing Wireless

Flashing red and blue lights

•  Supports Bluetooth
•  Supports profile A2DP (Advanced Audio 

Distribution Profile)

•  Digital volume control
•  Built-in microphone
•  Micro-USB port for battery recharge
•  Wireless range: 33 feet
•  DC battery power: built-in rechargeable lithium 

ion battery

•  Battery life: approx. 4 hrs at 100% volume 

6 hrs at 50%

•  3 pairs of eartips: 1 small, 1 medium, 1 large
•  Micro-USB to USB cable
•  Carry pouch

1.  Using a Micro-USB to USB cable (included), 

connect to the USB port of a powered on 
computer or USB power adaptor to charge the 
unit. Charge fully before use.  
 
Initial charge time is approximately 2 hours.  
The LED indicator will display a red light when 
charging, and turn blue when fully charged. 

1.  Use the controls on the connected Bluetooth 

Device to select a track.

2.  To play or pause the selected track, use the 

controls on the connected Bluetooth Device 
or press the Play/Pause/Speakerphone/Pair 
button.

3.  Audio played through the connected Bluetooth 

device will now be heard through the speakers.

1.   To accept a call, press the Play/Pause/

Speakerphone/Pair button, or use the controls 
on the connected phone. 

2.  To end a call, press the Play/Pause/

Speakerphone/Pair button, or use the controls 
on the connected phone.                                                          

3.  To re-dial the last dialed number, press the Play/

Pause/Speakerphone/Pair button twice. 

Press and hold to pair

Press to play or pause the current track.

Press to answer an incoming call.