Galaxy RainTai Technology Co. Ltd MM-01 Manual De Usuario
Melomemo wristband user guideline
1. Wake up and sleep
To wake up the device, touch the bottom area underneath the LOGO glass, or just wear it onto
forearm and fasten the velcro strap. System goes to sleep automatically a few minutes after the
wristband taken off from arm, in this mode system is in the lowest power consumption state to
save battery level.
2. Connect wristband with iOS device
Wristband acts in station mode in WiFi connection with APP. Firstly, an iOS device needs to
connect a WiFi router, then open the APP and press “connect to wristband” button. SSID and
password of WiFi router are sent to the wristband which will automatically connect to the router
itself. After a few seconds, both APP and wristband would tell the user that connection is
successfully established.
3. Charge wristband
Wristband is equipped with 2 embedded lithium ion batteries, normal charging time takes around
40 minutes. Simply connect the charging stand to a USB charger with a Micro USB cable, and
insert the wristband in the proprietary charging slots. Note that network functionality is disabled
during charging period. Also charging the device would reset system to prevent malfunctions and
connection failure.
4. LED indicator
A. Charge the Wristband
‐ The blue LED is in breath mode while charging, Blue LED would fully turned on if battery is
fully charged.
B. Wake up wristband
‐ Blue LED turned on indicates that there is no WiFi connection, waiting for APP to broadcasst
‐ Blue LED turned on indicates that there is no WiFi connection, waiting for APP to broadcasst
configuration information.
‐ Purple LED flashing indicates that wristband is connecting Wlan and APP server from previous
configuration. Connection is established when purple LED is fully turned on.
C. Broadcast Wlan information from APP
‐ Normally purple LED flashes during this period, if connection failed for some reason, blue LED
‐ Normally purple LED flashes during this period, if connection failed for some reason, blue LED
is turn on for user to retry again.
D. Low battery level
‐ Red LED is turned on to inform user that battery is low.
‐ Red LED is turned on to inform user that battery is low.