SID Global Sdn Bhd UR-001 Manual De Usuario

25

Sound of the reader’s working status provided to users through the Buzzer. 

Users can turn off the buzzer or set it “beep” after each time reader inventory tag. 

You can also set it “beep” afer each time reader identifies a tag. But this will reduce the 

efficiency of multi-tag identification. 

Operation interface as below: 

Note: The Buzzer will ring when Power On Self Test successfully and it is not 

controlled by this setting. 

After setting completes, the state of buzzer will be saved in the FLASH inside of reader 

and won’t lose after power cut. 

Reader supports two kinds of baud rate: 38400 bps and 115200 bps. 

You can set baud rate via the interface as below: 

   After setting successfully, new baud rate will be saved in the FLASH inside of 

reader and won’t lose after power cut. But the baud rate communicate with the reader 

must be new. 

Note: 

ƹIf you use the TCP/IP interface, please change the serial rate of TCP/IP module into 

corresponding. Details see the supplied TCP/IP interface configuration document. 

ƹInventorying Tags under Real Time Model will produce large amounts of data, 

please try to use 115200 baud rate.