SID Global Sdn Bhd UR-001 Manual De Usuario

8

Click on Get in Firmware Version or in Reader Identifier, the following screen displays: 

Now the reader has connected to PC successfully. 

After successfully connecting reader, we need to set some basic RF parameters: RF 

Output Power & RF Spectrum Setup. 

Select RF setup, as illustrated below: 

RF Output Power is the strength of RF output signal from antenna port. Unit is dBm. 

The range of output power is 0 - 33dBm. When this value setting completes, it will be 

saved in the reader automatically, and won’t be lost after cut off the power.   

Default value is 30dBm (1W).