GuangDong ElfBeauty Intelligence Technology Co. Ltd EB-E001 Manual De Usuario
11
4.
After all the steps from above, correctly put on the CharmBelt. Then click on to “start”, you can adjust intensity, duration and
program through the APP.
program through the APP.
Quick Guide to Solving Problems
Problem Possible
Cause Solution
The display doesn’t come on and there is
no signal from the unit
no signal from the unit
The battery is low
Recharge the battery or contact
ELFBEAUTY’s Customer Service for
repair/replacement of belt
ELFBEAUTY’s Customer Service for
repair/replacement of belt
The display is on but there is no signal
The battery is low
Recharge the battery or contact
ELFBEAUTY’s Customer Service for
repair/replacement of belt.
ELFBEAUTY’s Customer Service for
repair/replacement of belt.
Cannot connect to APP
The host is not powered on.
The Bluetooth is not turned on
The Bluetooth is not turned on
Tap on/off button. When the green light
starts to flash, it will ready to connect.
Ensure that Bluetooth is enabled.
starts to flash, it will ready to connect.
Ensure that Bluetooth is enabled.
Device not found
The belt is not turned on
The Bluetooth is not turned on
The Bluetooth is not turned on
Turn on the belt
Turn on the Bluetooth
Restart the APP
Turn on the Bluetooth
Restart the APP
Charging indicator does not flash/ cannot
be charged
be charged
The charging cable is not properly
connected to the main unit.
connected to the main unit.
Ensure the unit and cable are properly
connected
connected
Tips:
1. CharmBelt use EMS bioelectric technology. As to avoid discomfort, it is advised to commence use on a low level (levels
0-1), and then incrementally increasing intensity.
2.
The CharmBelt has to be firmly pressed to the skin for the phone APP to start to perform the operation.
3.
During use, apply warm, moist towel to skin to mitigate the irritation from feelings of dryness.
4.
Spread gel cream evenly over gel piece and then apply to body.