4Sight Inc. 4SK909M Manual De Usuario
Power & Charging
This unit is powered by a rechargeable lithium-ion battery. There are two ways to charge the dash
cam.
A. At home
You can charge the dash cam at home by using the included microUSB cable. Just connect
one end to the camera and the other to a computer or USB wall block. If using a wall block,
ensure the output is not more than 5V.
ensure the output is not more than 5V.
B. In your vehicle
Connect the dash cam to your car’s 12V output using the included cable. When powering on
your vehicle, the unit will automatically power on. When you power down your vehicle, the
Dash Cam will take up to 5 seconds to power off and automatically save the previously
recorded file.
Dash Cam will take up to 5 seconds to power off and automatically save the previously
recorded file.
Note: Only use 5V output voltage. It is recommended that you always use the original charger. Some
vehicles have constant 12V power flowing from the 12V outlet. In this case, you must long press the
power button on your Dash Cam to shut it down.
power button on your Dash Cam to shut it down.
Menu Settings
Power on your unit, stop the recording and hit the Menu button. This will bring you to the menu
options. Use the UP and DOWN buttons to navigate the menu options, use the Screen Toggle
button to change menus, and press OK to select. There are 4 main menus: Movie ModeMenu, Still
Capture
button to change menus, and press OK to select. There are 4 main menus: Movie ModeMenu, Still
Capture
, Media Tool, and General Settings.
Movie Mode Menu
Volume:
Adjust the system volume
Movie mode
: 1920 x 1080p 30fps | 1280 x 720p 60fps | 1280 x 720p 30fps | 640 x 480
30fps
Movie quality:
Super fine and Fine
Movie clip Time:
25min, 10min, 5min, 3min, 2min, 1min, and off.
Motion Event REC:
5 Seconds ,10 Seconds (The default), 30 Seconds and 1 Minute
Sound Record:
On (Default), Off
LDWS:
On, Off (Default) (Lane Departure Warning System). You must activate the LDWS FCWS:
On, Off (Default) (Front Car Warning System). You must activate the FCWS.
Still Capture
Still image size:
3M, 2M (default), 1.2M, VGA
Still quality:
Super Fine, Fine
Media Tool
Format card:
Yes, No (The default)
Card information:
Displays how much video time you would have with the different resolution
options that are available. This option also shows you the number of Photos you can take with
each specific resolution setting.
each specific resolution setting.