Linksys Wireless-G Portable USB Adapter WUSB54GP-UK Manual De Usuario

8

3. The Setup Wizard will ask you to choose a network mode. Click the Infrastructure Mode radio button if you 

want your wireless computers to network with computers on your wired network using a wireless access 
point. Click the Ad-Hoc Mode radio button if you want multiple wireless computers to network directly with 
each other. 

In the SSID field, enter the SSID of your wireless network.  The SSID must be identical for all devices in the 
network.  The default setting is linksys (all lowercase) for the Adapter, Linksys access points, and wireless 
routers. Click the Next button. 

4. If you chose Infrastructure Mode, go to Step 5 now.  If you chose Ad-Hoc Mode, select the correct operating 

channel for your network. Then, select the Network Mode from the drop-down menu.  Click the Next button, 
and go to Step 5. Click the Back button to change any settings.

Channel - The channel you choose should match the channel set on the other devices in your wireless 
network. If you are unsure about which channel to use, select the default channel (Channel 6).

Network Mode - Select Mixed Mode if you want to allow Wireless-G and Wireless-B computers on the 
network, even though network speeds will be reduced.  For maximum speed, select G-Only Mode; however, 
no Wireless-B users will be allowed on the network. 

NOTE: Network SSIDs should be unique to your network and identical for all 
devices within the network.