Transition Networks C6010-1029-B2 Prospecto
Transition Networks, Inc.
Worldwide Headquarters:
10900 Red Circle Drive
Minnetonka, MN 55343 USA
Worldwide Headquarters:
10900 Red Circle Drive
Minnetonka, MN 55343 USA
tel: 952.941.7600 / 800.526.9267
fax: 952.941.2322
info@transition.com
http://www.transition.com
fax: 952.941.2322
info@transition.com
http://www.transition.com
©2011 Transition Networks, Inc.
All trade marks are the property of their respective owners.
Technical information is subject to change without notice.
All trade marks are the property of their respective owners.
Technical information is subject to change without notice.
Specifications
Standards
ANSI T1.102, T1.402 and T1.408, ITU I.431, G.703. G.736, G.775
and G.823, ETSI 300-166, 300-233 and TBR12/12
and G.823, ETSI 300-166, 300-233 and TBR12/12
Copper Connectors
RJ-48, BNC
Fiber Connectors
SFP: LC connector Uses standard 100BASE-X/OC-3 SFP
Fixed Optics: ST or SC connector
Fixed Optics: ST or SC connector
Data Rates
T1 = 1.544 Mbit/s, E1 = 2.048 Mbit/s
Status LED
Power, Signal Detect Copper, Signal Detect Fiber
Dimensions
W: 0.86” [22 mm]; D: 6.5” [165 mm]; H: 3.4” [86 mm]
Power Consumption
2.6 Watts
Environment
See chassis specifications
Shipping Weight
1.0 lb. [.45 kg]
Regulatory Compliance
CISPR/EN55022 Class A; FCC Class A; CE Mark
MTBF
Greater than 250,000 hours (MIL-HDBD-217F)
Greater than 687,000 hours (Bellcore)
Greater than 687,000 hours (Bellcore)
Warranty
Lifetime
T1/E1 to Fiber Network Interface Device
Features
Remote in-band management
Local or Remote Loopbacks -
Copper or Fiber
Switch selectable for T1 or E1
Remote firmware upgrade
LEDs for immediate visual status
Supports dual or single fiber
Supports multimode and single mode
fiber at a variety of distances
Supports CWDM SFPs
SNMP management when used with
ION chassis and management module
Remote standalone can be managed
by local peer
The T1/E1 copper to fiber network inter-
face device (NID) provides a solution for
those users that need to extend T1/E1
connections over fiber.
face device (NID) provides a solution for
those users that need to extend T1/E1
connections over fiber.
The T1/E1 supports Small Form Pluggable
(SFP) transceivers to support a variety of
fiber types, distances and wavelengths to
provide maximum flexibility across a va-
riety of network topologies. The use of
Coarse Wave Division Multiplexing
(CWDM) SFPs can be utilized to further in-
crease the bandwidth capacity of the fiber
infrastructure.
(SFP) transceivers to support a variety of
fiber types, distances and wavelengths to
provide maximum flexibility across a va-
riety of network topologies. The use of
Coarse Wave Division Multiplexing
(CWDM) SFPs can be utilized to further in-
crease the bandwidth capacity of the fiber
infrastructure.
The T1/E1NID must be used in pairs. A
typical installation will include a chassis
card installed in the ION Platform locally
and a stand-alone device installed at the
remote location.
typical installation will include a chassis
card installed in the ION Platform locally
and a stand-alone device installed at the
remote location.
Application Diagram
C6010 Series
slide-in-module for the ion platform
T1/E1 to Fiber
The ION Platform
Ordering Information
C6010-1011
Twisted Pair (RJ-48)
[1.5 km/0.9 mi.]
to 1300nm multimode (ST)
[2 km/1.2 mi.] Link Budget: 11.0 dB
C6010-1013
Twisted Pair (RJ-48)
[1.5 km/0.9 mi.]
to 1300nm multimode (SC)
[2 km/1.2 mi.] Link Budget: 12.0 dB
C6010-1014
Twisted Pair (RJ-48)
[1.5 km/0.9 mi.]
to 1310nm single mode (SC)
[20 km/12.4 mi.] Link Budget: 16.0 dB
C6010-1015
Twisted Pair (RJ-48)
[1.5 km/0.9 mi.]
1310nm single mode (SC)
[40 km/24.9 mi.] Link Budget: 29.0 dB
C6010-1016
Twisted Pair (RJ-48)
[1.5 km/0.9 mi.]
to 1310nm single mode (SC)
[60 km/37.3 mi.] Link Budget: 32.0 dB
C6010-1017
Twisted Pair (RJ-48)
[1.5 km/0.9 mi.]
to 1550nm single mode (SC)
[80 km/49.7 mi.] Link Budget: 29.0 dB
C6010-1040
Twisted Pair (RJ-48)
[1.5 km/0.9 mi.]
to SFP slot (empty)
C6010-3040
(2) Coax (BNC)
to SFP slot (empty)
Single Fiber Products
Recommended use in pairs
C6010-1029-A1
Twisted Pair (RJ-48)
[1.5 km/0.9 mi.]
to 1310nm TX /1550nm RX single fiber SM (SC)
[20 km/12.4 mi.] Link Budget: 19.0 dB
C6010-1029-A2
Twisted Pair (RJ-48)
[1.5 km/0.9 mi.]
to 1550nm TX /1310nm RX single fiber SM (SC)
[20 km/12.4 mi.] Link Budget: 19.0 dB
C6010-1029-B1
Twisted Pair (RJ-48)
[1.5 km/0.9 mi.]
to 1310nm TX /1550nm RX single fiber SM (SC)
[40 km/24.9 mi.] Link Budget: 25.0 dB
C6010-1029-B2
Twisted Pair (RJ-48)
[1.5 km/0.9 mi.]
to 1550nm TX /1310nm RX single fiber SM (SC)
[40 km/24.9 mi.] Link Budget: 25.0 dB