DeLOCK Slot bracket USB 3.0 82977 Hoja De Datos

Los códigos de productos
82977
Descargar
Página de 1
DATA SHEET
WWW.DELOCK.COM
Description
Specification
© 2011 by Delock. All names and symbols mentioned here are property of the respective producer. 
Printing errors, changes and errors excepted.
Ref. 
EAN
Country of origin
Customs tariff number
Slot bracket USB 3.0 pin header 19 pin 
+ SATA 7 pin internal > 1 x USB 3.0-A 
+ 1 x Multiport external
This slot bracket by Delock can be 
installed into a standard PC slot and 
expands your system by an external 
Multiport. The Multiport interface is a 
combination of USB 3.0 and eSATAp, 
which offers a number of connecting 
options. Thus the Multiport enables you 
to connect devices, like e.g. Hubs, Card 
reader, external enclosure etc. with the 
following interface:
1. USB 3.0 
2. USB 2.0 
3. eSATAp (Power Over eSATA 5 V) 
4. eSATA 
• Connector: internal 1 x 19 pin USB 3.0 pin header female 
                                 + SATA 7 pin
                    external 1 x USB 3.0-A female 
                                   1 x Multiport female
• Cable gauge: 28 AWG 
• Current output: max. 900 mA per each USB port
• Voltage: 5 V
• Data transfer rate up to: 
  Super-Speed 5 Gb/s, High-Speed 480 MB/s                               
  Full-Speed 12 Mb/s, Low-Speed 1.5 Mb/s,  eSATA 3 Gb/s     
• Downwards compatible to USB 2.0 and USB 1.1
• Cable length: ca. 45 cm (without connector)
System requirement
• PC with a free slot
• Mainboard with a free 19 pin USB 3.0 pin header connector 
   and a free SATA port
Note: For operation of two devices at the same time, which 
          equire more than 900 mA for each device, you may need 
          to connect an additional power supply for the connected 
          device.
Package content
• Slot bracket
Package
• Delock poly bag
82977
4043619829774
China
84718000