Rose VSP-2X8VB Prospecto
Phone: 281-933-7673
E-mail: sales@rose.com
10707 Stancliff Rd. Houston, TX 77099
Rose Electronics – Europe: +49 (0
)
2454 969442 Rose Electronics – Asia: +65 6324 2322
DS-VSP 2.1
Copyright 2004 Rose Electronics. All rights reserved
W W W . R O S E . C O M
Typical Application
2 x 4 model
Introduction
The VideoSplitter is a “plug and play”, video
distribution amplifier that allows you to drive multiple video
monitors from one or two computers or video sources. The
monitors can be located up to 250 feet from the video source
using optional extended distance cables. The VideoSplitter is
ideal for use in classrooms, conference rooms, point-of-sale
monitors from one or two computers or video sources. The
monitors can be located up to 250 feet from the video source
using optional extended distance cables. The VideoSplitter is
ideal for use in classrooms, conference rooms, point-of-sale
terminals, process control areas, airports, restaurants, security
systems, and many other applications. You can easily daisy-
chain units to attach additional monitors.
systems, and many other applications. You can easily daisy-
chain units to attach additional monitors.
Cables
The VideoSplitter uses the common HD15 VGA
connectors. The video source connectors are HD15M and the
video monitor connectors are HD15F. For the best results over
long cable lengths, it is recommended to use Rose high quality,
coax cables.
long cable lengths, it is recommended to use Rose high quality,
coax cables.
Installation
Easy installation, expansion, and maintenance are
hallmarks of all Rose products. Simply connect your computers
or video sources and video monitors to the appropriate
VideoSplitter ports, connect and apply power, and it is ready to
use. The green power LED will come on and you should see
video from the selected video source on all of the connected
monitors.
VideoSplitter ports, connect and apply power, and it is ready to
use. The green power LED will come on and you should see
video from the selected video source on all of the connected
monitors.
Operation
There are features in the VideoSplitter that are rather
unique. The first one is the optional built-in A/B switch (2x2, 2x4,
2x8 models only) which allows switching from two independent
video sources to the output monitors. The second feature is the
output enable. In many types of applications, the computer that
generates the video must also be used to setup the application
2x8 models only) which allows switching from two independent
video sources to the output monitors. The second feature is the
output enable. In many types of applications, the computer that
generates the video must also be used to setup the application
generating the video. It must also be accessible for
maintenance. Displaying the maintenance information on all the
monitors would be undesirable. You can disable all the outputs
except port number one, allowing you to monitor the
information and only distribute the video to the other monitors
maintenance. Displaying the maintenance information on all the
monitors would be undesirable. You can disable all the outputs
except port number one, allowing you to monitor the
information and only distribute the video to the other monitors
at the appropriate time. Port number one is always live.
A third feature is the units expandability. Units can easily be
daisy-chained together to distribute the video source to 256 or
more monitors using the 1x16 model.
A third feature is the units expandability. Units can easily be
daisy-chained together to distribute the video source to 256 or
more monitors using the 1x16 model.
Options
The VideoSplitter is rack mountable with 19”, 23”, and
24” rack mount kits. The unit is also available in a 110/220 volt
model.
model.
Greater Distance
To locate your video monitors even further than
250 feet, try our CrystalView extenders which can go as far as
1,000 feet using twisted pair CAT5 cabling or 33,000 feet using
fiber cabling.
1,000 feet using twisted pair CAT5 cabling or 33,000 feet using
fiber cabling.
Part Numbers
VSP-1X2VB
1 VGA IN to 2 VGA OUT
VSP-1X4VB
1 VGA IN to 4 VGA OUT
VSP-1X8VB
1 VGA IN to 8 VGA OUT
VSP-1X16VB
1 VGA IN to 16 VGA OUT
VSP-2X2VB
2 VGA IN to 2 VGA OUT
VSP-2X4VB
2 VGA IN to 4 VGA OUT
VSP-2X8VB
2 VGA IN to 8 VGA OUT
VSP-2X16VB
2 VGA IN to 16 VGA OUT
VSP-1X2VB/Q
4 VGA IN to 2 VGA OUT
VSP-1X4VB/Q
4 VGA IN to 4 VGA OUT
VSP-1X2VB/D
2 VGA IN to 2 VGA OUT
VSP-1X4VB/D
2 VGA IN to 4 VGA OUT
VSP-1X8VB/D
2 VGA IN to 8 VGA OUT
RM-SV1/xx
Rack Mount kit, 2U, (xx = 23", or 24")
RM-SVx16
Rack Mount kit 19", 2U
Specifications
Dimensions
Width Depth Height Weight
(x2, x4, or x8)
8.85 4.90
2.10 (in) 3.0 lbs
(x16 model)
13.25 4.90
5.25 (in) 6.5 lbs
Input Power
External adapter or
optional 90-240 VAC Auto-switching
Output Power
17 VAC CT, 700 ma
Connectors:
Power: DIN5
Video in: HD15 Male
Video out: HD15 Female
Video Bandwidth 350 MHz
Video Sync
Video Sync
Vertical/Horizontal, supports composite
sync and sync on green
Rack mount kits 19", 23”, or 24”
Chassis
Chassis
Electro-galvanized steel, painted
Controls
Power On/Off Switch, 4-Position Dip
Switch, A/B source switch
Indicators
Power LED (green),
Environmental
32°F - 131°F (0°- 55° C),
0%-80% non-condensing RH
VSP-2X8VB model (top) / VSP-1X16VB model (bottom)