Cisco CiscoSecure ACS for UNIX Upgrade to v2.3 CSU-2.3-UG Manual De Usuario

Solaris 2.6, or Solaris 2.5.1 with patches (see “Solaris 2.5.1 Patches,” page xiv for special
instructions concerning Solaris 2.5.1)

To check your version of Solaris, enter the Solaris command uname -a. If the system returns
5.5.1, Solaris 2.5.1 is installed. If the system returns 5.6, Solaris 2.6 is installed.

To support the RADIUS tunneling feature of CiscoSecure ACS 2.3(5), the Sun Ultra 1or
compatible workstation must be running Solaris 2.6.

CiscoSecure ACS works with the following network access servers (NASes):

Cisco routers (models AS5100 through AS5800 and AS2509 through AS2512) running Cisco IOS
software (Release 11.2 or later)

Selected routers not running Cisco IOS software, running RADIUS protocols conforming to IETF
RADIUS, specifically RFCs 2138 and 2139.

To support the RADIUS tunneling feature of CiscoSecure ACS 2.3(5), the AAA server must
be running Cisco IOS Release 12.0(5)T or another vendor's NAS software that supports
RADIUS tunneling attributes.

The web-browser-based CiscoSecure ACS workstation console requires the following hardware and
software:

Pentium 90 or faster PC, or an UltraSPARC or better workstation

32 MB of RAM on a PC

SVGA display with resolution of 1024 x 768 or higher

Minimum 1 MB of video RAM (2 MB recommended)

17-inch or larger monitor recommended

One of the following web browsers:

Netscape Communicator (version 4.5, 4.51, 4.6, 4.61, or 4.7 on Windows 95 or NT; version 4.5,
4.51, 4.6, 4.61, or 4.7 on Solaris 2.5.1 or 2.6)

Internet Explorer (version 4.01 or 5.0 on Windows 95 or NT)

The browser must be enabled for Java and Java Script.