EK Water Blocks EK-FB GA 990FXA-UD7 - EN (Nickel) 3831109820674 Prospecto
Los códigos de productos
3831109820674
Product Specification Sheet
EK-FB GA 990FXA-UD7
Nickel Plexi
Copper Plexi
Copper Acetal
Nickel Acetal
EAN / Part #: 3831109820674
Summary:
- Featuring a unique, modern look copper design High performance
Full Board water block for GIGABYTE 990FXA UD7 series
Full Board water block for GIGABYTE 990FXA UD7 series
motherboards.
- EK FB series water blocks cover all chips on motherboards that
require cooling if overclocked.
- An extreme high flow path design and unique increased cooling
surface over Northbridge keeps all your motherboard components
cool even at highest loads and over clock.
- Blocks base is made of SE CU electrolytic copper.
- High quality CNC manufacturing.
- Leak tested to 2 bar pressure (30psi).
- Safe, noob-proof mounting system with Standoffs.
- EK FB series water blocks cover all chips on motherboards that
require cooling if overclocked.
- An extreme high flow path design and unique increased cooling
surface over Northbridge keeps all your motherboard components
cool even at highest loads and over clock.
- Blocks base is made of SE CU electrolytic copper.
- High quality CNC manufacturing.
- Leak tested to 2 bar pressure (30psi).
- Safe, noob-proof mounting system with Standoffs.
Key Features:
- Real high flow internal design gives minimum flow restriction which
allows lowest possible temperatures, not only at FB water block, but
also in the entire water-cooling system.
also in the entire water-cooling system.
- Cools NB, SB and VREGs.
- Allows maximum flexibility for water cooling system setup also in
- Allows maximum flexibility for water cooling system setup also in
SLI/CF.
- Reduces temperatures up to 40°C or more at maximum load.
- Much cooler components allow maximum possible overclocking.
- Much cooler components allow maximum possible overclocking.
Technical data:
- dimensions of copper base: 150 x 57 x 4,2mm
- dimensions of acrylic top: 149 x 56 x 9,5mm
- threads: 2 x G 1/4
- fittings: optional, not enclosed
- neto weight: 300g
- bruto weight: 330g
- dimensions of acrylic top: 149 x 56 x 9,5mm
- threads: 2 x G 1/4
- fittings: optional, not enclosed
- neto weight: 300g
- bruto weight: 330g
Packing list:
- 1 × Water block
- 1 × EK-G 1/4 Spacer with o-ring
- Mounting mechanism with 6 × brass standoffs
- Thermal pads
- 6 washers
- Aluminum SB heat sink
- 1 × EK-G 1/4 Spacer with o-ring
- Mounting mechanism with 6 × brass standoffs
- Thermal pads
- 6 washers
- Aluminum SB heat sink
blocks
pumps
resevoirs
accessories
radiators
Do not forget other EK products for your water cooling system
:
EKWB d.o.o., Pot za Brdom 100, 1000 Ljubljana, Slovenia - EU
www.ekwaterblocks.com
info@ekwaterblocks.com