HP DL380 G7 X5690 2P 12GB-R P410i/1GB 8 SFF 750W RPS 633404R-421 Manual De Usuario
Los códigos de productos
633404R-421
Upgradeability
Upgradeable to 2 processors (12 cores)
Memory Protection
Advanced ECC (multi-bit error protection)
Mirroring mode
Mirroring mode
Online Spare supported on 5600 Series
Lockstep mode
Lockstep mode
Memory
Type
DDR3 Registered (RDIMM) and Unbuffered (UDIMM)
Standard (Performance
Models)
Models)
12GB (6 x 2GB) PC3-10600R (DDR3-1333) Registered DIMMs
Standard (Base Models)
6GB (3 x 2GB) PC3-10600R (DDR3-1333) Registered DIMMs
Standard (Entry Models)
4GB (2 x 2GB) PC3-10600R (DDR3-1333) Registered DIMMs
Standard (Efficiency
Models)
Models)
4GB (2 x 2GB) PC3-10600E (DDR3-1333) Unbuffered DIMMS
Maximum (RDIMM)
384GB (12 x 32GB) for Registered Memory configurations
NOTE: Using PC3-8500R DDR3 Registered (RDIMM) memory, operating at
800MHz when fully populated at 2 DIMMs per Channel in 12 slots.
800MHz when fully populated at 2 DIMMs per Channel in 12 slots.
Maximum (UDIMM)
48GB (12 x 2GB) for Unbuffered Memory configurations
NOTE: Using PC3-10600E DDR3 Unbuffered (UDIMM) memory, operating at
1066MHz when fully populated at 2 DIMMs per Channel in 12 slots.
1066MHz when fully populated at 2 DIMMs per Channel in 12 slots.
NOTE: If only one processor is installed, only half the DIMM slots are available
NOTE: If only one processor is installed, only half the DIMM slots are available.
NOTE: when populating with the 16GB Memory Kits (Quad-Rank), only 12 DIMMs can be populated.
NOTE: For G6 and G7 servers using Xeon 5600 series processors, the default memory speed is 1333MHz
with either one or two DIMMs per channel. For G6 and G7 servers using Xeon 5500 series processors, an
RBSU option is available to disable 1333MHz operation (which will result in 1067MHz operation).
NOTE: UDIMM support is only on 12-slot servers.
NOTE: Depending on the memory configuration and processor model, the memory speed may run at
1333MHz, 1066MHz, or 800MHz. Please see the Online Memory Configuration Tool at:
NOTE: If only one processor is installed, only half the DIMM slots are available.
NOTE: when populating with the 16GB Memory Kits (Quad-Rank), only 12 DIMMs can be populated.
NOTE: For G6 and G7 servers using Xeon 5600 series processors, the default memory speed is 1333MHz
with either one or two DIMMs per channel. For G6 and G7 servers using Xeon 5500 series processors, an
RBSU option is available to disable 1333MHz operation (which will result in 1067MHz operation).
NOTE: UDIMM support is only on 12-slot servers.
NOTE: Depending on the memory configuration and processor model, the memory speed may run at
1333MHz, 1066MHz, or 800MHz. Please see the Online Memory Configuration Tool at:
.
Network Controller
Two HP NC382i Dual Port Multifunction Gigabit Server Adapters (four ports total) with TCP/IP Offload
Engine, including support for Accelerated iSCSI
Engine, including support for Accelerated iSCSI
Expansion Slots
NOTE: The system board has 2 PCI connectors, but the below riser cards have the actual PCI slots, to which PCI cards attach.
Up to six available PCI-Express Gen2 slots, optional mixed PCI-X / PCI-Express or x16 PCI configurations available (see "Standard
Features -Expansion Slots" section for more details).
Up to six available PCI-Express Gen2 slots, optional mixed PCI-X / PCI-Express or x16 PCI configurations available (see "Standard
Features -Expansion Slots" section for more details).
Primary Riser
(Standard)
(Standard)
Expansion
Slots #
Technology
Bus
Width
**
Connector
Width
Bus Number
*
Form Factor
Notes
1
PCIe Gen2
X8
X16
7
Full Length,
Full Height
Slot
QuickSpecs
HP ProLiant DL380 Generation 7 (G7)
Standard Features
DA - 13595 North America — Version 63 — December 7, 2012
Page 3