Brodit ProClip 854699 Prospecto

1.

2.

4.

3.

Please read all of the instructions and look at the pictures before attaching the ProClip.  
 
1. Use the enclsoed alcohol pad to clean the area where the ProClip is to be installed. Press the thin end of the
enclosed gap opener into the gap between the air vent and the surrounding air vent frame, to widen the gap. Peel
off the cover of adhesive tape on the ProClip.  
 
2. Press the angled edge on the upper part of the ProClip up into the seam/gap between the air vent and the
surrounding panel frame.  
 
3. Place your index fingers on top of the ProClip and your thumbs underneath the ProClip. Push up on the lower
part of the ProClip so it flexes upward and hooks into the seam/gap next to the gap opener. Press firmly down on
the lower inside of the ProClip to make sure the angled edge goes all the way into the seam/gap. Pull out the gap
opener.  
 
4. The ProClip is in place.