3com 5500-EI 28-Port 3CR17161-91 Hoja De Datos
Los códigos de productos
3CR17161-91
2
3COM SWITCH 5500 10/100 FAMILY
KEY BENEFITS
(CONTINUED)
MULTILAYER SECURITY
The Switch 5500 family provides integrated and
distributed security enforcement that can be
managed from a central location. Access control lists
(ACLs) help protect network resources from
unauthorized access and data corruption. User-
based authen tication and DES 56/168-bit† encryption
help secure Layer 3 protocols and management
controls such as SSH v2 and SNMP. IEEE 802.1X
RADIUS/TACACS+ network login and RADIUS
Authenticated Device Access (RADA) enforce access
control at the network edge.
distributed security enforcement that can be
managed from a central location. Access control lists
(ACLs) help protect network resources from
unauthorized access and data corruption. User-
based authen tication and DES 56/168-bit† encryption
help secure Layer 3 protocols and management
controls such as SSH v2 and SNMP. IEEE 802.1X
RADIUS/TACACS+ network login and RADIUS
Authenticated Device Access (RADA) enforce access
control at the network edge.
FLEXIBLE, SECURE FIBER CONNECTIONS
The Switch 5500-EI FX is ideally suited for applications
where security is of paramount importance, or where
long cable runs are required. This switch provides
connections on fiber infrastructures that are almost
impervious to electronic eavesdropping because they
use optical transmission. The switch uses 100BASE-X
SFP transceivers for its 24 100 MB connections,
providing the flexibility of running any mix of 100BASE-
FX multimode fiber (up to 2 km/1.2 miles) or 100BASE-
LX10 single-mode fiber (up to 10 km/6.2 miles).
where security is of paramount importance, or where
long cable runs are required. This switch provides
connections on fiber infrastructures that are almost
impervious to electronic eavesdropping because they
use optical transmission. The switch uses 100BASE-X
SFP transceivers for its 24 100 MB connections,
providing the flexibility of running any mix of 100BASE-
FX multimode fiber (up to 2 km/1.2 miles) or 100BASE-
LX10 single-mode fiber (up to 10 km/6.2 miles).
PRIORITY FOR CONVERGED BUSINESS TRAFFIC
Next-generation traffic prioritization features—
including advanced policy-based Class of Service/
Quality of Service (CoS/QoS), eight priority queues,
committed access rates, bandwidth limiting and
filtering and more—identify and optimize delay-
sensitive traffic such as voice and video. To help assure
this optimization, switches can be configured to
automatically isolate voice traffic from 3Com and other
IP telephony systems within a voice-dedicated VLAN.
including advanced policy-based Class of Service/
Quality of Service (CoS/QoS), eight priority queues,
committed access rates, bandwidth limiting and
filtering and more—identify and optimize delay-
sensitive traffic such as voice and video. To help assure
this optimization, switches can be configured to
automatically isolate voice traffic from 3Com and other
IP telephony systems within a voice-dedicated VLAN.
UNIQUE AC/DC POWERED OPERATION
3Com Switch 5500 products are the first stackable
switches to support multiple power schemes right out
of the box, with a choice of AC, AC and DC, or DC
operation. Select models also support IEEE 802.3af
PoE, enabling power to be injected out to the edge of
the network without the need to install additional
wires or upgrade existing power supplies.
switches to support multiple power schemes right out
of the box, with a choice of AC, AC and DC, or DC
operation. Select models also support IEEE 802.3af
PoE, enabling power to be injected out to the edge of
the network without the need to install additional
wires or upgrade existing power supplies.
REDUNDANT POWER SYSTEM SUPPORT
All 3Com Switch 5500 models support a redundant
power system (RPS) connection.
power system (RPS) connection.
RPS units provide these benefits:
› For PWR switches, an RPS can deliver more power
budget for IEEE 802.3af Power over Ethernet than
what the switches alone can provide. For example,
the Switch 5500G PWR 52-port switch has a PoE
power budget of 300 Watts, which means that less
than half of the ports can provide the full 802.3af
PoE power of 15.4 Watts. With an RPS providing
power, all 48-ports can provide a full 15.4 Watts of
PoE power.
what the switches alone can provide. For example,
the Switch 5500G PWR 52-port switch has a PoE
power budget of 300 Watts, which means that less
than half of the ports can provide the full 802.3af
PoE power of 15.4 Watts. With an RPS providing
power, all 48-ports can provide a full 15.4 Watts of
PoE power.
› They deliver redundant power to switches so there is
continued operation should the switch unit power
supply fail. This allows for continuous operation of
advanced Enterprise networks, particularly impor-
tant for converged networks running IP phones on
the network.
supply fail. This allows for continuous operation of
advanced Enterprise networks, particularly impor-
tant for converged networks running IP phones on
the network.
3Com H3C
®
RPS Systems
3Com switches are compatible with 3Com H3C RPS
solutions. These are enterprise-class power
redundancy systems that work with many 3Com
fixed-configuration switches. 3Com Corporation
manufactures networking equipment under the H3C
brand for sale into many markets.
solutions. These are enterprise-class power
redundancy systems that work with many 3Com
fixed-configuration switches. 3Com Corporation
manufactures networking equipment under the H3C
brand for sale into many markets.
These H3C RPS models are used with the Switch 5500:
› The H3C RPS 1000 is 1U high and provides multiple
power output connections to support multiple switch
units at the same time. Two power rectifiers can be
installed for 1+1 load sharing and power redundancy.
It supports switches with -54V RPS connections, and
delivers sufficient power to fully provision all PoE
ports of a switch with full power redundancy.
units at the same time. Two power rectifiers can be
installed for 1+1 load sharing and power redundancy.
It supports switches with -54V RPS connections, and
delivers sufficient power to fully provision all PoE
ports of a switch with full power redundancy.
› The RPS 500 provides selective DC outputs of +12V
and -54V. This is a fixed-configuration 1U high unit
with a single power rectifier and a single power
connection. Sufficient redundant power is available
for provisioning a single Switch 5500 48- and 24-port
non-PoE unit.
with a single power rectifier and a single power
connection. Sufficient redundant power is available
for provisioning a single Switch 5500 48- and 24-port
non-PoE unit.
POWERFUL, UNIFIED MANAGEMENT
The 3Com Operating System employed in the Switch
5500G is the same powerful software used in other
3Com enterprise stackable switches as well as in
3Com modular switch and enterprise router families.
This makes for an easy mix-and-match of networking
technologies with consolidated administration over
the entire network, as well as edge-to-core visibility
and control when using 3Com management
applications such as Intelligent Management Center,
Enterprise Management Suite and Network Director.
5500G is the same powerful software used in other
3Com enterprise stackable switches as well as in
3Com modular switch and enterprise router families.
This makes for an easy mix-and-match of networking
technologies with consolidated administration over
the entire network, as well as edge-to-core visibility
and control when using 3Com management
applications such as Intelligent Management Center,
Enterprise Management Suite and Network Director.