Philips 4000 series LED TV 22PFL4907 22PFL4907/F7 Manual De Usuario

English

17

Philips Wireless MediaConnect

(Available for 32PFL4907 & 26PFL4907only)
You can enjoy your TV as a PC monitor wirelessly using your home 

network. Make sure you download the Philips Wireless MediaConnect 

software and install it on your PC before you perform the steps below.

Install Philips Wireless MediaConnect

1

  Display Setup using Home menu and use ▲▼ to select Software, 

then press OK.

2

  Use ▲▼ to select MediaConnect code, then press OK.

•  Write down the 12-digit code displayed on the screen. You will 

need this to download MediaConnect software.

3

  Start your Internet browser on your PC and open 

the Philips Wireless MediaConnect download page at 

 

 On the website, you can check the necessary PC system 

requirements.

4

  Enter the 12 digit code you wrote at step 2.

5

  Click the “Download now” button to download the free 

Philips Wireless MediaConnect software.

6

  Once downloaded, start the file “Philips Wireless MediaConnect_

setup.exe”. Follow the instructions on the screen to complete 

software installation.

Using Philips Wireless MediaConnect

1

  Launch Philips Wireless MediaConnect on your PC first.

•  Select “Start projecting” with right click on the  

  in the 

system tray.

•  The start up screen for Philips Wireless MediaConnect will 

be displayed and the unit searches for an available PC that is 

running Philips Wireless MediaConnect software.

Once connected, the Philips Wireless MediaConnect software will 

encode and stream the screen of your PC as a video along with audio.
Depending on your computer and network configuration, there will be 

a delay between your PC screen and the TV but the audio-video will 

always be in sync.

To read the Philips Wireless MediaConnect Help, right click the program 

icon in the notification tray of the PC and select Help.

You can project high definition (HD) or standard definition (SD) video, 

depending on the processing power of your PC. For smooth playback 

of HD video, please use a hardware accelerated video player on your 

computer. A hardware accelerated video player uses the graphics 

adapter of your PC to render HD video rather than the processor. 

This frees up the processor for Philips Wireless MediaConnect video 

encoding. The content protection on most Blu-ray or DVD disc  

movies might restrict watching the movie on TV when the disc is 

playing on a PC. The TV shows PC media files with a small delay. 

Philips Wireless MediaConnect is only available for PC.

Windows XP, Windows Vista, Windows 7, 

Mac OS X 10.6 or above (PC only)
Minimum PC requirements

•  Intel

®

 Core™ 2 Duo 1.8GHz

•  512MB RAM

•  IEEE 802.11n

Recommended PC requirements

•  Intel

®

 Core™ 2 Duo 2.1GHz

•  1GB RAM

View photos, play music and watch videos

using DLNA

On your TV you can play video, music and photo files stored on DLNA 

certified home media servers connected to your home network. In 

order to use this feature, you must connect this unit to the Internet.
It is recommended that files to be played back in this unit are recorded

under the following specifications:
<MP3>

•  Sampling frequency 

: 32kHz or 44.1kHz or 48kHz

•  Constant bit rate 

: 32kbps - 320kbps

<JPEG>

•  Upper limit  

: 16Mpixel

<MPEG>

•  Playable codec 

: MPEG1, MPEG2

•  Maximum size of a video : 1920 x 1080

•  Audio type 

:  AC3, MPEG1 audio layer 3 (MP3), 

MPEG1 audio layer 2, LPCM

Note

 

• A maximum of 1,023 folders or files can be recognized.

 

• For the home server list, maximum of 16 servers can be displayed.

 

• The 10th and deeper hierarchies cannot be displayed.

 

• Unplayable files in the home server will not be displayed in the file list.

 

• For some files, playback is not available even if displayed in the file list.

 

• In order to play back the contents in home servers, the player and the servers must be 

connected to the same access point.

 

• Compatibility and available playback function may differ depending on the home server.

 

• Video files with unsupported audio format will be skipped.

 

• The quality of the playback picture or audio differs depending on your network condition.

Before using DLNA

Follow the procedure below before using DLNA.

1

  Connect this unit to the Internet.

 

 Connecting the TV to the Internet using an Ethernet cable 

➠

 

➠

•  Broadband Internet connection of 8Mbps or faster is required.

2

  Set up the necessary network connection settings. Network

 

➠

Using DLNA

1

  Start DLNA home media servers in your home network.

•  For details, refer to the instruction book of the DLNA certified 

device.

2

  Press MENU / E�IT on the remote control.

3

  Use ▲▼◄► to select Browse PC.

•  This unit will start loading the home server list.

4

  After loading, home server list will appear. Select a home server you 

want to access, then press OK.