Supermicro 8-Port SATA Card - (AOC-SAT2-MV8) AOC-SAT2-MV8 Manual De Usuario
Los códigos de productos
AOC-SAT2-MV8
AOC-SAT2-MV8 User's Guide
12
3.3 Installing the driver into a new system
(*Note: A new system is a system that has no operating system
installed yet, and the SAT2-MV8 driver installation is a part of the OS
installation.)
installed yet, and the SAT2-MV8 driver installation is a part of the OS
installation.)
For the Windows Operating System
a. Install the controller and make sure that the BIOS screen displays as
shown on the previous page.
b. Insert the Windows Setup CD and boot from it.
c. When prompted at the bottom of the screen to install a third party driver,
press the <F6> key. (*Note: You have only 5 seconds to press <F6>. If
you miss it, you will need to restart the system and repeat this step
again.)
d. Insert the driver disk into the system, and wait until you are prompted to
install a driver. Press <S> to specify that the driver is included in an
additional device--the floppy disk, and press <Enter>.
e. When the Marvell's driver disk--"Marvell Serial ATA PCI-X Adapter" is
located, press <Enter>.
f . Press <Enter> again to continue with the Windows OS installation.