Peerless PJF2-298 Hoja De Datos

Peerless Industries, Inc.
3215 W. North Ave.  Melrose Park, IL 60160
708-865-8870   800-865-2112  Fax 708-865-2941

© 2007 Peerless Industries, Inc.  All rights reserved.

Peerless is a registered trademark of Peerless Industries, Inc.

Vector Pro, Armor Lock, and Armor Lock Plus are trademarks of Peerless Industries, Inc.

All other brand and product names are trademarks or registered trademarks of their respective owners.

The Vector Pro

 II provides a clean look with its NEW cable manage-

ment capabilities. The included extension column connector incorpo-
rates internal cord management paths that keep unsightly cords
concealed from view. The mount also features a ceiling plate, ball and
socket design, multi-directional positioning (roll, pitch, and yaw) for
proper image alignment and complete Armor Lock

™ 

security at every

connection point. This projector mount is perfect for use in class-
rooms, boardrooms, hotels, bars, and restaurants or anywhere a
projector needs to be mounted. The Vector Pro

™

  II can be flush

mounted, mounted using 1-1/2" diameter extension column, mounted
using 1/2" thread rod or wall mounted.

• Color: black

• *30° (±15°) pitch, 30° (±15°) roll, 360° yaw - All with positive lock at

any degree

• Theft-resistant Armor Lock security for complete, integrated

security from projector to ceiling

• Two thumb screws allow for easy projector removal

• Features a 1-1/2" cord access hole

• Ships fully assembled and attaches to projector adapter plate with a

partial rotation and engages into place

• Can be attached to a 1-1/2" 11.5 NPT extension column, 1/2"

threaded rod, or projector wall arm

• Most models offer quick and easy lamp and filter access

• Designed to route cords internally through an extension column

• Ceiling plate included - full line solution

 

Roll & pitch may be limited when flush mounted depending on the

dimensions of the specific projector.

TECHNICAL DATA SHEET -

The Vector Pro II projector mount shall be a Peerless Model PJF2     and shall be mounted where indicated on the plans. It shall feature
30° (±15°) pitch, 30° (±15°) roll, and 360° yaw. It shall have a 50 lb maximum load capacity.  It shall have a quick release spring loaded
screw for easy removal and installation of the projector. It shall feature security screws.  It shall be constructed of aluminum and nylon
finished in black. The main housing is constructed of aluminum. The connector, which locks into the steel adapter plate, is constructed of
nylon and is secured to the aluminum ball joint with a 1/4 -20 x 1 1/2" long steel bolt. The nylon material can take direct heat up to 250°
without any deformation. Its melting point is 500° F. The PJF2-1 has been pull tested to 1000 lbs. The Vector Pro II is capable of holding up
to 50 lb at the maximum 30° (+15°, -15°) roll or pitch. Installation and assembly shall be done in accordance with the instructions provided
by the manufacturer.

• Fixed and Adjustable length 1 1/2" NPT Extension

Columns (“EXT” or “ADJ” models)

• Black External Cord Wrap (ACC 852 & ACC 856)

• Concrete Anchors (ACC 205 or ACC 203)

• Armor Lock Plus

™

 security cable with Kensington

Lock (ACC 020)

• Armor Lock Plus

™

 security cable (ACC 021)

• Lightweight Suspended Ceiling Plate (CMJ 455)

• Anti-Vibration Ceiling Plates (ACC 840 & ACC 845)

• Side to Side Adjuster (ACC 830)

• Threaded Rod Adapter (ACC 810)