Eaton Pulsar MX 4000 RT Netpack 68502 Prospecto

Single phase UPS - 

Headquarters
140, avenue Jean-Kuntzmann
ZIRST - Montbonnot Saint-Martin
38334 Saint-Ismier Cedex - France
Tel.: +33 (0)4 76 18 30 00

Due to developments in technical standards and the equipment described in this document, we cannot be held liable for complianc

e with the characteristics indicated by the images and text unless they are confirmed by us. All the brand names referred to in

this document are protected by copyright.

Publication: MGE UPS SYSTEMS (February 2006) - Design and rewriting: 3c-evolution.com - Integration: Pamplemousse: +33 4 79 37 

87 66 – Translation: TTP: +33 4 78 66 47 99.

Pulsar MX RT Tower or rack-mounting: standard backup time

68 501

68 504

68 513

(14)

68 514

(15)

Pulsar MX RT Netpack: standard backup time 

68 502

68 505

(with rack kit, 

(with rack kit, 

+ NMC + rack kit

casters, NMC card) 

casters, NMC card)  

Pulsar MX EXB RT : battery extension module

68 515

68 527 (Pulsar MX Frame EXB empty to be fitted with 4 or 8 Battery sub-modules) 

Pulsar MX ModularEasy: paralleling kit (2 Pulsar MX) 

68 520

-

MX / EXB RT Rack Kit: rail kit for 19" rack mounting 

68 002

-

IEC 32 A kit , 2 X 2 m long cables: male to 

68 525

-

hardwired and female to hardwired 
Pulsar MX Battery / Power electronics sub-module 

68 524 / 68 522 

68 524 / 68 523 

68 524 / 68 523 

1: Available from November 2006. 2: 2 Pulsar MXs can be paralleled using ModularEasy. 3: At 70% load. 4: 4 IEC C13 (10A) 2 m long cables for use with retention clips (8 cables for use with Pulsar MX Frame).
5: Frequency conversion for non-paralleled units only. 6: Economy mode, 91% in normal mode. 7: At 70% nominal rating with power factor 0.7 typical values after 3 charge/discharge cycles, with 3-5 year old
batteries. Weekly battery test without interrupting the load (daily or monthly if required). EXB compatible with 0.8 power factor loads. 8: With Pulsar MX Frame EXB (4 battery units). 9: With Pulsar MX Frame EXB
(8 battery units). 10: Solution-Pac CD-ROM supplied as standard. 11: Applicable to US models. 12: 50 dbA above 5 kVA. 13: Depending on the country, see www.mgeups.com/service. 14: 68 513 = 68 526
(empty Pulsar MX Frame) + 3 x 68 524 + 3 x 68 523. 15: 68 514 = 68 526 (empty Pulsar MX Frame) + 4 x 68 524 + 4 x 68 523.

Rating (kVA) / (kW) 

4 kVA / 3,6 kW

5 kVA / 4,5 kW

15 kVA / 13, 5 kW

20 kVA / 18 kW

Paralleling 
Maximum rating / 

8 kVA / 4 kVA + 4 kVA redundancy

10 kVA / 5 kVA + 5 kVA redundancy 15 kVA / 10 kVA + 5 kVA redundancy 20 kVA / 15 kVA + 5 kVA redundancy

redundancy

(2)

5 kVA + 2 x 5 kVA redundancy

10 kVA + 2 x 5 kVA redundancy 

Inputs 
Technology

VFI-SS-113, on-line double conversion with power factor correction, convection cooled static bypass switch 

Number of phases, input connections 

L + N, terminals up to 6 mm

2 

L + N or 3P + N, terminals up to 35 mm

2

,

separate or common AC normal and AC bypass

Nominal voltage 

200/208/220/230/240/250 V

200/208/220/230/240/250 V (L + N) or 380/400/415 V (3P + N) 

Voltage range without using battery

(3)

120 - 280 V 

120 - 280 V (L + N), 250 - 465 V (3P + N) 

Input frequency range, THDI 

40-70 Hz, < 7%

Outputs 
Output connections

(4)

terminals + 8 IEC C13 (10A) + 2 IEC C19 (16A) 

terminals + 16 IEC C13 (10A) + 4 IEC C19 (16A) 

Remotely controlled Powershare sockets 

2 groups (2 IEC C13 10A per group) 

2 groups (4 IEC C13 10A per group) 

Output voltage and frequency

(5)

, THDU, efficiency

(6)

200/208/230/240 /250 V, 50 / 60 Hz autoselect, frequency converter as standard, <2%, 97% 

Pulsar MX standard backup time 

10 minutes

8 minutes 

8 minutes 

Pulsar MX + EXB / MX + 2 EXB / MX + 3 EXB

45 / 80 / 120 minutes

35 / 60 / 95 minutes

20 minutes

(8)

/ 35 minutes

(9)

Communications 
Slots 

1 minislot or 2 minislots (Frame) compatible with Minislot NMC, NMC ModBus/JBus, MC Contacts/Serial 

Ports

Remote Power off (RJ11), 5 output contacts (DB9), setup using Solution-Pac

(10)

(USB and DB9-serial ports), 

EXB module detection (RJ45), paralleling (DB 15)

Operating conditions, standards and approvals 
Performance, safety, EMC, surge protection 

IEC/EN 62 040-3, IEC/EN 62 040-1-1, IEC/EN 62 040-2 class A (class B as option), 4 kV IEC 61 643, UL 1778 and CSA 22.2

(11) 

Operating temperature, noise, approvals, guarantee 

0°C to 40°C continuous, 45 dbA

(12)

, UL, TüV, GS mark, CB, C-Tick, CE, IEC 61 931, one year

(13)

Dimensions / weight 
Pulsar MX RT standard backup tower 

444.5 mm high x 130.6 mm wide x 735 mm deep / 57 kg 

Tower 690 mm high (795 mm casters) x 444.5 mm wide x 735 mm deep /  

Pulsar MX RT standard backup rack 

3U x 444.5 mm wide compatible with 800-1000 mm deep rack 

250 kg Rack 16U x 444.5 mm wide, compatible with 800-1000 mm deep rack 

MX EXB battery unit tower / rack 

444.5 mm high x 130.6 mm wide x 650 mm deep / 3U x 444.5 mm wide / 70 kg

dimensions same as MX Frame / 230 kg for 15 kVA, 290 kg for 20 kVA 

Pulsar MX ModularEasy, paralleling kit 

dimensions same as EXB battery unit / 10 kg 

-

◗

Solution Pac 2 suite supplied for remote
supervision.

◗

MGE's Enterprise Power Manager for supervision
via Ethernet and Teleservice. EPM is compatible
with standard network management systems
(Tivoli, CA unicenter, HP Openview).

◗

Compatible with Network Shutdown Module 
for monitoring a number of UPSs and shutting
down the servers on the network.

◗

1 year guarantee, including batteries.

◗

Extended guarantee.

◗

Commissioning.

◗

Teleservice (in-band and out-of-band).

◗

Personalised maintenance contracts.

1: Depending on the country, see www.mgeups.com/services.

2 IEC 16A outlet sockets

Output circuit protection

1 minislot for NMC, Modbus/JBus 
or MC Contacts/Serial card

RJ11 remote power off

RJ45 EXB battery module detection

DB9 with 5 output contacts 

EXB battery extension module power connector

DB 15 paralleling

DB 9 serial and USB ports:
Setup and supervision

Input 

Output

8 IEC 10A outlet sockets

Retention clips

PULMX515UK.qxd  16/02/06  15:13  Page 2