Intel i7-3610QE AW8063801118306 Manual De Usuario
Los códigos de productos
AW8063801118306
Thermal Management
66
Datasheet, Volume 1
The following considerations and limitations apply to the Intel Turbo Boost Technology
power monitoring:
power monitoring:
• Internal power monitoring is calibrated per processor family and is not conducted
on a part-by-part basis. Therefore, some difference between actual and reported
power may be observed.
power may be observed.
• Power monitoring is calibrated with a variety of common, realistic workloads near
T
j,Max
. Workloads with power characteristics markedly different from those used
during the calibration process or lower temperatures may result in increased
differences between actual and estimated power.
differences between actual and estimated power.
• In the event an uncharacterized workload or power “virus” application were to
result in exceeding programmed power limits, the processor Thermal Control
Circuitry (TCC) will protect the processor when properly enabled. Adaptive Thermal
Monitor must be enabled for the processor to remain within specification.
Circuitry (TCC) will protect the processor when properly enabled. Adaptive Thermal
Monitor must be enabled for the processor to remain within specification.
Note:
It is recommended to use TCC Activation Offset to optimize thermal control of the
processor while in Turbo. See
for more information.
5.3
Intel
®
Turbo Boost Technology Power Control
Illustration of Intel Turbo Boost Technology power control is shown in the following
sections and figures. Multiple controls operate simultaneously allowing for
customization for multiple system thermal and power limitations. These controls allow
for Turbo optimizations within system constraints and are accessible using MSR, MMIO,
or PECI interfaces.
sections and figures. Multiple controls operate simultaneously allowing for
customization for multiple system thermal and power limitations. These controls allow
for Turbo optimizations within system constraints and are accessible using MSR, MMIO,
or PECI interfaces.
5.3.1
Package Power Control
Intel Turbo Boost Technology package power control allows for customization in order
to implement optimal Turbo within platform power delivery and package thermal
solution limitations. The control settings are shown in
to implement optimal Turbo within platform power delivery and package thermal
solution limitations. The control settings are shown in
illustrated in
.