HP 403619-B21 Prospecto

Descargar
Página de 9
System Unit
System Unit
System Unit
System Unit
Dimensions
Dimensions
Dimensions
Dimensions (H x W)
4.460" x 3.970"
Media
Media
Media
Media
N/A (Backplane connection to Virtual Connect, Switch or Pass-Thru Module)
Ports
Ports
Ports
Ports
Two
System Inlet Temperature
System Inlet Temperature
System Inlet Temperature
System Inlet Temperature Operating
10° to 35°C (50° to 95°F) at sea level with an
altitude derating of 1.0°C per every 305 m
(1.8°F per every 1000 ft) above sea level to a
maximum of 3050 m (10,000 ft), no direct
sustained sunlight. Maximum rate of change is
10°C/hr (18°F/hr). The upper limit may be
limited by the type and number of options
installed.
System performance may be reduced if operating
with a fan fault or above 30°C (86°F).
Non-operating
-30° to 60°C (-22° to 140°F). Maximum rate of
change is 20°C/hr (36°F/hr).
Relative Humidity
Relative Humidity
Relative Humidity
Relative Humidity
(non-condensing)
Operating
10 to 90% relative humidity (Rh), 28°C (82.4°F)
maximum wet bulb temperature, non-
condensing.
Non-operating
5 to 95% relative humidity (Rh), 38.7°C
(101.7°F) maximum wet bulb temperature, non-
condensing.
Altitude
Altitude
Altitude
Altitude
Operating
3050 m (10,000 ft). This value may be limited by
the type and number of options installed.
Maximum allowable altitude change rate is 457
m/min (1500 ft/min).
Non-operating
9144 m (30,000 ft). Maximum allowable
altitude change rate is 457 m/min (1500 ft/min).
Environment-friendly
Environment-friendly
Environment-friendly
Environment-friendly
Products and Approach
Products and Approach
Products and Approach
Products and Approach
End-of-life Management
End-of-life Management
End-of-life Management
End-of-life Management
and Recycling
and Recycling
and Recycling
and Recycling
Hewlett-Packard offers end-of-life HP product return, trade-in, and recycling
programs in many geographic areas. For trade-in information, please go to
. To recycle your product, please go to:
 or contact your nearest HP sales office.
Products returned to HP will be recycled, recovered or disposed of in a
responsible manner.
The EU WEEE directive (2002/95/EC) requires manufacturers to provide
treatment information for each product type for use by treatment facilities.
This information (product disassembly instructions) is posted on the Hewlett
Packard web site at: 
. These instructions may
be used by recyclers and other WEEE treatment facilities as well as HP OEM
customers who integrate and re-sell HP equipment.
QuickSpecs
QLogic QMH2462 4Gb FC HBA for HP c-Class
QLogic QMH2462 4Gb FC HBA for HP c-Class
QLogic QMH2462 4Gb FC HBA for HP c-Class
QLogic QMH2462 4Gb FC HBA for HP c-Class
BladeSystem
BladeSystem
BladeSystem
BladeSystem
Technical Specifications
DA - 12523   Worldwide — Version 7 — May 30, 2008
Page 8