Intel i7-3920XM Extreme AW8063801009607 Manual De Usuario
Los códigos de productos
AW8063801009607
Processor Configuration Registers
80
Datasheet, Volume 2
2.5.35
TSEGMB—TSEG Memory Base Register
This register contains the base address of TSEG DRAM memory. BIOS determines the
base of TSEG memory which must be at or below Graphics Base of GTT Stolen Memory
(PCI Device 0 Offset B4h bits 31:20).
base of TSEG memory which must be at or below Graphics Base of GTT Stolen Memory
(PCI Device 0 Offset B4h bits 31:20).
Note:
BIOS must program TSEGMB to an 8 MB naturally aligned boundary.
2.5.36
TOLUD—Top of Low Usable DRAM Register
This 32 bit register defines the Top of Low Usable DRAM. TSEG, GTT Graphics memory
and Graphics Stolen Memory are within the DRAM space defined. From the top, the
Host optionally claims 1 to 64 MB of DRAM for internal graphics if enabled, 1 or 2 MB of
DRAM for GTT Graphics Stolen Memory (if enabled) and 1, 2, or 8 MB of DRAM for TSEG
if enabled.
and Graphics Stolen Memory are within the DRAM space defined. From the top, the
Host optionally claims 1 to 64 MB of DRAM for internal graphics if enabled, 1 or 2 MB of
DRAM for GTT Graphics Stolen Memory (if enabled) and 1, 2, or 8 MB of DRAM for TSEG
if enabled.
Programming Example:
C1DRB3 is set to 4 GB
TSEG is enabled and TSEG size is set to 1 MB
Internal Graphics is enabled, and Graphics Mode Select is set to 32 MB
GTT Graphics Stolen Memory Size set to 2 MB
BIOS knows the OS requires 1 GB of PCI space.
BIOS also knows the range from 0_FEC0_0000h to 0_FFFF_FFFFh is not usable
TSEG is enabled and TSEG size is set to 1 MB
Internal Graphics is enabled, and Graphics Mode Select is set to 32 MB
GTT Graphics Stolen Memory Size set to 2 MB
BIOS knows the OS requires 1 GB of PCI space.
BIOS also knows the range from 0_FEC0_0000h to 0_FFFF_FFFFh is not usable
by the system. This 20 MB range at the very top of addressable memory space
is lost to APIC and Intel TXT.
is lost to APIC and Intel TXT.
According to the above equation, TOLUD is originally calculated to:
4 GB = 1_0000_0000h
The system memory requirements are:
4 GB (max addressable space) – 1G B (PCI space) – 35 MB (lost memory) = 3 GB –
35 MB (minimum granularity) = 0_ECB0_0000h
35 MB (minimum granularity) = 0_ECB0_0000h
Since 0_ECB0_0000h (PCI and other system requirements) is less than
1_0000_0000h, TOLUD should be programmed to ECBh.
1_0000_0000h, TOLUD should be programmed to ECBh.
These bits are Intel TXT lockable.
B/D/F/Type:
0/0/0/PCI
Address Offset:
B8–BBh
Reset Value:
00000000h
Access:
RW-L, RW-KL
Size:
32 bits
BIOS Optimal Default
00000h
Bit
Access
Reset
Value
RST/
PWR
Description
31:20
RW-L
000h
Uncore
TESG Memory base (TSEGMB)
This register contains the base address of TSEG DRAM memory.
This register contains the base address of TSEG DRAM memory.
BIOS determines the base of TSEG memory which must be at or
below Graphics Base of GTT Stolen Memory (PCI Device 0 Offset
B4h bits 31:20).
19:1
RO
0h
Reserved (RSVD)
0
RW-KL
0b
Uncore
Lock (LOCK)
This bit will lock all writeable settings in this register, including
This bit will lock all writeable settings in this register, including
itself.