HP 350e Gen8 648377-421 Manual De Usuario
Los códigos de productos
648377-421
NOTE: Memory configurations listed do not apply to "Factory Integrated Models".
DDR3 memory population guidelines
For detailed memory configuration rules and guidelines, please use the Online DDR3 Memory Configuration Tool:
For detailed memory configuration rules and guidelines, please use the Online DDR3 Memory Configuration Tool:
General Guidelines:
White DIMM slots denote the first slot of a channel. For 1 DPC (DIMM per channel) populate white slots only.
Install DIMMs only if the corresponding processor is installed.
If only one processor is installed in a two processor system, only half of the DIMM slots are available.
To maximize performance, balance the total memory capacity between all installed processors
Install DIMMs only if the corresponding processor is installed.
If only one processor is installed in a two processor system, only half of the DIMM slots are available.
To maximize performance, balance the total memory capacity between all installed processors
Populate DIMMs from heaviest load (quad-rank) to lightest load (single-rank) within a channel
Heaviest load (DIMM with most ranks) within a channel goes furthest from the processor
Heaviest load (DIMM with most ranks) within a channel goes furthest from the processor
Do not mix UDIMMs, RDIMMs or LRDIMMs
Quad rank LR DIMMs are supported at 3 DIMMs per channel.
DIMMs of different voltages (1.35V & 1.5V) may be mixed in any order
Quad rank LR DIMMs are supported at 3 DIMMs per channel.
DIMMs of different voltages (1.35V & 1.5V) may be mixed in any order
The system will power them at the higher voltage
DIMMs of different speed grades may be mixed in any order
The system will select a common optimal speed
Memory speed is a function of the processor QPI bus speed.
Population Guidelines:
There are three (3) channels per processor; six (6) channels per server
There are two (2) DIMM slots for each memory channel; twelve (12) total slots
Memory channel 1 consists of the two (2) DIMMs that are furthest from the processor
Memory channel 3 consists of the two (2) DIMMs that are closest to the processor
There are two (2) DIMM slots for each memory channel; twelve (12) total slots
Memory channel 1 consists of the two (2) DIMMs that are furthest from the processor
Memory channel 3 consists of the two (2) DIMMs that are closest to the processor
DIMM slot/capacity/populated speed table
DIMM Type ->
Registered DIMMS (RDIMMs)
Unbuffered with ECC DIMMs (UDIMMs)
DIMM Rank ->
Single Rank (1R)
Dual Rank (2R)
Single Rank
(1R)
Dual Rank (2R)
DIMM Capacity ->
4GB
4GB
8GB
8GB
16GB
2GB
4GB
8GB
DIMM Native Speed (MHz) ->
1333
1600
1600
1333
1333
1333
1333
1333
Voltage
LV
Std
Std
LV
LV
LV
LV
LV
SLOTS THAT CAN BE POPULATED
12 slot servers
12 slot servers
12
12
12
12
12
12
12
12
MAXIMUM CAPACITY (GB)
12 slot servers
12 slot servers
48
48
96
96
192
24
48
96
POPULATED DIMM SPEED (MHz)
1 DIMM Per Channel
1 DIMM Per Channel
1333
1600
1600
1333
1333
1333
1333
1333
2 DIMM Per Channel
1333
1600
1600
1333
1333
1333
1333
1333
QuickSpecs
HP ProLiant ML350e Generation 8 (Gen8)
Memory
DA - 14340 Worldwide — Version 4 — June 18, 2012
Page 35