Black Box AC504A-CP Manual De Usuario
BLACK BOX
®
2 of 3
01/26/2010
#26674
Splitter/extenders send video over CAT5 to multiple locations.
»
Send video up to 500 feet over
ordinary CAT5 cable.
»
Eliminate the need for bulky VGA cables.
»
Buffer and boost signals for a clear
video image.
»
Single-channel extender connects a remote
VGA screen via a receiver.
»
Splitter/extenders send VGA signals
over CAT5 UTP to receivers attached to two
or four monitors.
or four monitors.
»
Single-channel wallplate transmitter extender
mounts in any standard junction box.
FEATurEs
Say goodbye to bulky, difficult-to-terminate VGA cable. BLACK
BOX
®
Mini CAT5 Extenders
enable you to use ordinary CAT5 UTP
cable to connect video monitors up to 500 feet (152.4 m) from your
PC or video source.
PC or video source.
They’re ideal for placing video displays such as monitors or
LCD screens where you need them to display information such
as schedules, menus, or advertising.
as schedules, menus, or advertising.
The extender transmitters amplify the signal for clean and crisp
transmission, and differential signaling eliminates ground loops and
noise. In the transmission, there’s little or no degradation of video
quality, and they handle resolutions up to 1600 x 1200 at any refresh
rate. The VGA models work with VGA, SVGA, XGA, and UXGA video.
noise. In the transmission, there’s little or no degradation of video
quality, and they handle resolutions up to 1600 x 1200 at any refresh
rate. The VGA models work with VGA, SVGA, XGA, and UXGA video.
You can also transport them and install them with ease. Rugged
and reliable, the extender units feature a compact plastic enclosure
that can withstand the daily grind and frequent plugging and
unplugging of cables.
Mini CAT5 Extender Kits
that can withstand the daily grind and frequent plugging and
unplugging of cables.
Mini CAT5 Extender Kits
These are low-cost, single-channel extenders for sending video
signals over CAT5 UTP links. With these kits, you get a single-channel
transmitter and a receiver unit, which work together to extend the
video signal at a long distance. Just plug a standard CAT5 cable
up to 500 feet (152.4 m) long between the local and remote units.
transmitter and a receiver unit, which work together to extend the
video signal at a long distance. Just plug a standard CAT5 cable
up to 500 feet (152.4 m) long between the local and remote units.
The transmitter-extender combo requires only a single power
supply, which can be plugged in at either end of the link—
whichever side is most convenient for you.
whichever side is most convenient for you.
Choose from VGA or Component versions.
OVERVIEW
Mini CAT5 VGA Splitter/Extender,
Transmitter with Local Port,
2-Channel (AC600A)
Mini CAT5 VGA Receiver (AC602A)
Mini CAT5 VGA Receiver (AC602A)
CAT5 Solid-Conductor Cable
CAT5 Solid-Conductor Cable
VGA Cable
VGA Cable
Video Source
Monitor
VGA Monitor
VGA Monitor
The VGA kit converts a PC’s VGA or signal into a format that can
be transmitted over the CAT5 link, then converts it back to VGA for
connection to your monitor, projector or other display device.
connection to your monitor, projector or other display device.
The transmitter and receiver units in the Component kit
are the same as the VGA model’s, but it has cables for connecting
Component devices at each end. On the transmitter side, these cables
connect to the three RCA connectors of DVD players or other video
sources that output Component (RGB, Y-Pb-Pr, or Y-Cb-Cr) video.
And, on the receiver side, the cables connect HDTVs, high-end
monitors, and other compatible displays.
Mini CAT5 VGA Extender Transmitter in Wallplate
Component devices at each end. On the transmitter side, these cables
connect to the three RCA connectors of DVD players or other video
sources that output Component (RGB, Y-Pb-Pr, or Y-Cb-Cr) video.
And, on the receiver side, the cables connect HDTVs, high-end
monitors, and other compatible displays.
Mini CAT5 VGA Extender Transmitter in Wallplate
This extender transmitter not only sends video up to 500 feet
(152.4 m) over CAT5.and enables you to eliminate bulky VGA cables
in your application, it also has a single-gang wallplate that mounts in
any standard junction box—saving you valuable space and simplifying
your installation.
in your application, it also has a single-gang wallplate that mounts in
any standard junction box—saving you valuable space and simplifying
your installation.
For this reason, the Mini CAT5 VGA Extender Transmitter
with Wallplate is ideal for crowded video distribution applications,
especially those in which equipment is close to a wall.
especially those in which equipment is close to a wall.
The rear of the extender has an RJ-45 connector for CAT5 links,
and the front has an HD15 connector for local video links, as well
as a power supply that connects with screw terminals.
as a power supply that connects with screw terminals.
For receiver-side connections, you’ll need to order the Mini CAT5
VGA Receiver (AC602A).