Intel G645 BX80623G645 Manual De Usuario
Los códigos de productos
BX80623G645
Datasheet, Volume 2
279
Processor Configuration Registers
1
ROS-V
0b
Powerg
ood
Primary Pending Fault (PPF)
This field indicates if there are one or more pending faults logged
This field indicates if there are one or more pending faults logged
in the fault recording registers. Hardware computes this field as
the logical OR of Fault (F) fields across all the fault recording
registers of this remapping hardware unit.
0 = No pending faults in any of the fault recording registers
0 = No pending faults in any of the fault recording registers
1 = One or more fault recording registers has pending faults. The
FRI field is updated by hardware whenever the PPF field is set
by hardware. Also, depending on the programming of Fault
Event Control register, a fault event is generated when
hardware sets this field.
0
RW1CS
0b
Powerg
ood
Primary Fault Overflow (PFO)
Hardware sets this field to indicate overflow of fault recording
Hardware sets this field to indicate overflow of fault recording
registers. Software writing 1 clears this field. When this field is set,
hardware does not record any new faults until software clears this
field.
B/D/F/Type:
0/0/0/VC0PREMAP
Address Offset:
34–37h
Reset Value:
0000_0000h
Access:
RW1CS, ROS-V, RO
Size:
32 bits
BIOS Optimal Default
0_0000h
Bit
Attr
Reset
Value
RST/
PWR
Description