JVC LT-23D50 Manual De Usuario

- 17 -

Programme Selection (Previous or next

programme)
Press

button to select the previous

programme.

Press

button to select the next

programme.

Programme Selection (direct access):
Press digit buttons on the remote control to

select programmes between 0 and 9. TV

will switch to the selected programme. To

select programmes between 10 - 99, press

the digit buttons consecutively which

programme you want to select (eg. for

programme 27, first press 2 and then 7).

When it is late to press second digit button

only the first digit programme will be dis-

played. The limit of the delay time is 3 sec-

onds.
Example: PR6 press 6, PR12 press 1

and 2.
Press directly the programme number to

reselect single digit programmes.

Hint: The channel list numbers are assigned by the

broadcasters. Because not all channels are broadcast

free-to-air and stored by the receiver, the channel list

numbers do not run continuously. The fifteenth channel in

the list, for example, may not be channel number 15 but
channel number 17.
Hint: If you enter a number which does not correspond to

a stored channel, the next valid channel number is se-

lected instead. If you enter a number greater than the

highest numbered channel in the channel list, the IDTV

will select the last channel in the list.

Operating while watching

IDTV

Pressing the TV/DTV button at any time

while watching television programmes will

switch the TV set between displaying the

digital terrestrial television

broadcasting

and

its normal analogue

broadcasting

It is also used to switch to the last watched

mode (TV or DIGITAL TV) from the

EXT

mode. For example; if a DVD player is con-

nected

with a SCART cable

and powered

on, then the IDTV will automatically switch to

EXT

mode. The IDTV will switch to the last

watched mode (TV or DIGITAL TV) if DVD

player is switched off or TV/DTV button is

pressed.

EVERYDAY OPERATION

While using the IDTV to the full, there are

great many buttons to use in different situa-

tions. Many of the menu screens displayed

by the IDTV have reminders as to which but-

ton do what, at the base of the screen. In ad-

dition, many screens have further help avail-
able which is displayed when the

button

is pressed, as prompted at the bottom right

of the screen.

OVER AIR DOWNLOAD
Over Air Download (OAD): To ensure that

your IDTV always has the most up-to-date

information. Please ensure that after use it

is set to its standby mode.

At 3AM each day,

the IDTV automatically searches for any new

information which may be broadcast and will

download this to your IDTV automatically.

This operation will normally take approxi-

mately 30 seconds.

If you want to do this, you need to set Auto-

matic Download to Enabled in Receiver

Upgrade setting. For details see page 23.

INFORMATION BANNER

Whenever you change channel, using the

buttons or the number buttons,

an information banner is displayed at the

bottom of the screen. This will remain on the

screen for approximately three seconds. The

information banner can also be displayed at

any time while watching TV by pressing the

button on the remote control. Pressing

the

button again removes the banner.

Hint: Not all channels broadcast the programme

data. If the name and times of the programme is

not available then No Information is displayed
in the information banner.

ENG-IDTV-JVC-1724W-17 INCH TFT LCD.230205.p65

24.02.2005, 08:19