HP DL385p Gen8 704913-S01 Manual De Usuario
Los códigos de productos
704913-S01
HP Server ROM
HP ROM (Read Only Memory) is now digitally signed using HP's Corporate Signing Service. This signature is
verified before the flash process starts, reducing accidental programming and preventing malicious
efforts to corrupt system ROM.
verified before the flash process starts, reducing accidental programming and preventing malicious
efforts to corrupt system ROM.
HP ROM provides for essential initialization and validation of hardware components before control is
passed to the customer-installed operating system. The ROM also provides the capability of booting from
various fixed media (HDD, CD-ROM) and removable media (USB), to continue operation to the operating
system.
passed to the customer-installed operating system. The ROM also provides the capability of booting from
various fixed media (HDD, CD-ROM) and removable media (USB), to continue operation to the operating
system.
HP ROM performs very early configuration of the video controller, to allow monitoring of initialization
progress via an attached monitor. If configuration or hardware errors are discovered during this early
phase of hardware initialization, suitable messages are now displayed on the connected monitor.
Additionally, these configuration or hardware errors are logged to the Integrated Management Log (IML)
to assist in diagnosis.
progress via an attached monitor. If configuration or hardware errors are discovered during this early
phase of hardware initialization, suitable messages are now displayed on the connected monitor.
Additionally, these configuration or hardware errors are logged to the Integrated Management Log (IML)
to assist in diagnosis.
HP's ProLiant ROM is used to configure the following:
Processor and chipset status registers
System memory, memory map, and memory initialization
System hardware configuration (Integrated PCI devices and optional PCIe cards).
Customer-specific BIOS configuration (using the HP ROM-Based Setup Utility (RBSU).
System memory, memory map, and memory initialization
System hardware configuration (Integrated PCI devices and optional PCIe cards).
Customer-specific BIOS configuration (using the HP ROM-Based Setup Utility (RBSU).
NOTE: For further information, please refer to HP's RBSU (ROM based setup utility) user guide:
.
Storage Controller
One of the following
depending on Model
depending on Model
Entry Model
HP Smart Array P420i/ZM (RAID 0/1)
Storage Centric Model
HP Smart Array P420i/512MB FBWC (RAID 0/1/1+0/5/5+0/6/6+0)
Dedicated Workload Model HP Smart Array P420i/1GB FBWC (RAID 0/1/1+0/5/5+0/6/6+0)
Maximized Consolidation
Model
Model
HP Smart Array P420i/2GB FBWC (RAID 0/1/1+0/5/5+0/6/6+0)
Internal Storage Devices Diskette Drive
None
Optical Drive
Optional: DVD-ROM, DVD-RW
NOTE: Not Available on 8+8 LFF, 12LFF or 25SFF Models.
Hard Drives
None ship standard
Drive Bays
One of the following
depending on Model
depending on Model
Entry Model
8-SFF drive bays(additional 8-SFF option)
Storage Centric Model
12-LFF drive bays
Dedicated Workload Model 8-SFF drive bays total with options for DVD OR
optional second 8-SFF drive bay set (total of
16SFF drive bays, no DVD)
16SFF drive bays, no DVD)
NOTE: Optional 2nd 8-SFF drive kit requires 2nd
Smart Array Controller (PCIe) for support
recommend HP Smart Array P420 PCI card).
Smart Array Controller (PCIe) for support
recommend HP Smart Array P420 PCI card).
Maximized Consolidation
Model
Model
25-SFF drive bays total
NOTE: For best performance on the 25 Small Form Factor drive cage where
less than 25 drives are installed you will need to balance the drives on the
less than 25 drives are installed you will need to balance the drives on the
QuickSpecs
HP ProLiant DL385p Generation 8 (Gen8)
Standard Features
DA - 14329 North America — Version 25 — December 13, 2013
Page 5