Toshiba DKT2004-CT Manual De Usuario

If you call a station [DN] and it is busy or its user does not answer, you can leave a 
message waiting indication by pressing the 

0VJ

 button. The Msg LED at the called 

station flashes after you press the button. The user can call you back by pushing the 

0VJ

 button with the flashing LED. (Voice mail devices, as well as people, can leave 

message waiting indications.)

All telephones have a fixed 

0VJ

 button/LED for receiving/retrieving messages left by 

callers that called the [PDN]. Telephones that own [PhDNs] can also have flexible 
message waiting [PhDN/MW] buttons/LEDs for receiving/retrieving messages left by 
callers.

Each Message Waiting indication can accept up to four MW indications at each [DN] 
or [PhDN] at one time. One of the indications for each [DN] is reserved for the 
Message Center set in system programming. 

➤

The called party must answer—by either going off-hook or by pressing the 

6SNU

 

button—for the indication to be cancelled automatically.

➤

1. Press 

0VJ

 when the Msg 

LED is flashing red. If 
there is no answer, hang up 
and try at a later time.

Your telephone rings the station or voice mail 
device that set the indication. If there is no 
answer, the LED continues to flash.

2. Press 

7$/.

 after 

receiving the message to 
terminate the call.

Voice mail devices may cancel the indication after 
a short delay.

3. Repeat the Steps to retrieve 

additional messages.

The Msg LED flashes if you have more messages.

➤

Press 

0VJ

 to answer

The Msg

indication is cancelled when the called 

party answers.