Toshiba KV-7960A Manual De Usuario

The nickel-cadmium battery pack (3N-100AAS) is used for
power source of the built-in clock and memory circuit.

1. Turn on the power of the VCR.
2. The battery pack in the VCR is charged.

Removal:
1. Remove the battery cover.
2. Disconnect the connector in the VCR.

i

Temperature
For charging

:

0

°

C to 80

°

C

For operating

:

–20

°

C to 80

°

C

For storing

:

–30

°

C to 80

°

C

i

Charging time

:

more than 48 hours

i

Use only for this VCR.

i

Do not dispose of the batteries into fire.

i

Do not short circuit the terminals.

i

Do not modify or disassemble.

i

Avoid dropping, unnecessary shocks.

Connector

RED wire

Battery pack

Installation:
1. Install the battery pack placing the red wire upside, and

connect the connector on the battery pack to this VCR.
Make sure the polarities (+) and (–) are correct.

2. Close the battery cover.

If the Battery Pack is removed, the memory data will be
erased. In such a case, perform the setting from the first step.