Toshiba W-804 Manual De Usuario

You can view the clock, linear time counter or tape remaining
time in the VCR display or on the TV screen.

Each time you press 

REMAIN/COUNTER, the VCR display

changes in sequence as follows:

The indication above will also appear on the TV screen by pressing
DISPLAY. They are switchable with REMAIN/COUNTER.

The counter is automatically reset to “0H00M00S” when a cassette is
ejected.  If you want to reset at another point, such as the beginning of a
new recording, just press 

COUNT RESET.

Notes
• The linear time counter does not work on non-recorded portions on the tape.
• When the tape is ejected or the VCR is turned off, the display changes to

clock.

• If the tape rewinds back over “0H00M00S”, “–” appears in the VCR display.
• The displayed time of the linear time counter is only an approximation.

To view the tape remaining time in the VCR display, select the
tape length beforehand.

Turn on the VCR and load a cassette.

Press 

PROG. to display the MENU screen.

Select “SET UP” using 

FF or REW, and press ENTER.

Select the length of the tape.

T120: for a T-120 tape or shorter
T160: for a T-140 or T-160 tape
T180: for a T-180 tape

Press 

PROG. to exit.

Press 

REMAIN/COUNTER.

The remaining time (“RT - : - -”) appears in the VCR display.

Notes
• The displayed remaining time is an approximation.
• The remaining time is calculated according to the tape speed (SP or SLP)

and the cassette type.

These functions will help your playback.

→

 Linear time counter (HMS) 

→

 Tape remaining time (REMAIN/RT) 

→

 Clock

(Continued)