Toshiba W525 Manual De Usuario
15
SETTING THE VIDEO
CHANNEL
To view playback of a recorded tape, or to watch a
program selected by the VCR's channel selector, the
TV must be set to channel 3 or 4 (video channel).
program selected by the VCR's channel selector, the
TV must be set to channel 3 or 4 (video channel).
When a TV is connected with the 75 ohm coaxial cable
only.
only.
1
During power off, press and hold the “3” or “4”
number button on the remote control for 3 seconds.
The “TV/VCR” indicator will flash 4 times.
number button on the remote control for 3 seconds.
The “TV/VCR” indicator will flash 4 times.
2
Turn ON the VCR POWER button.
3
Turn ON the TV and set to CH 3 or 4 to correspond
with the channel selected in step 1.
with the channel selected in step 1.
4
Press the TV/VCR selector button to select the VCR
position.
The TV/VCR indicator will light.
position.
The TV/VCR indicator will light.
5
Select any channel to receive
a TV station in your area.
The channel number will appear
on the screen for about 4 seconds.
a TV station in your area.
The channel number will appear
on the screen for about 4 seconds.
CH 125
4
This VCR can display on the TV screen in the
English, Spanish or French languages.
English, Spanish or French languages.
CHECK BEFORE YOU BEGIN
• Turn ON the TV and set to the video channel 3 or 4.
• Turn ON the VCR POWER button.
• Press the TV/VCR selector button to select the VCR
• Turn ON the VCR POWER button.
• Press the TV/VCR selector button to select the VCR
mode.
When a TV is connected with an audio/video cable,
turn the TV on and select the video input mode on the TV.
turn the TV on and select the video input mode on the TV.
2
Press the TRACKING SET +
or – button to select the
desired language: English
(ENGLISH), Spanish
(ESPAÑOL) or French
(FRANCAIS), then press the
ENTER button.
or – button to select the
desired language: English
(ENGLISH), Spanish
(ESPAÑOL) or French
(FRANCAIS), then press the
ENTER button.
3
Press the MENU button until the menu screen is
cleared.
cleared.
1
Press the MENU button.
Press the TRACKING SET +
or – button to select the
LANGUAGE option, then
press the ENTER button.
Press the TRACKING SET +
or – button to select the
LANGUAGE option, then
press the ENTER button.
SETTING THE CLOCK
1 2
NOTES: • After a power failure or disconnection of the
power, the timer settings will be lost. In this
case, reset the present time.
case, reset the present time.
• Press the CANCEL button to move cursor
backward for correction.
• If you want to correct time or date while the
clock is functioning, press the MENU button,
then press TRACKING SET + or – button to
select the CLOCK SET option, then press the
ENTER button.
To make any adjustments perform steps 2
through 3.
then press TRACKING SET + or – button to
select the CLOCK SET option, then press the
ENTER button.
To make any adjustments perform steps 2
through 3.
1
Press the MENU button. Press
the TRACKING SET + or –
button to select the CLOCK SET
option, then press the ENTER
button.
the TRACKING SET + or –
button to select the CLOCK SET
option, then press the ENTER
button.
2
Press the TRACKING SET + or
– button to set the month, then
press the ENTER button.
– button to set the month, then
press the ENTER button.
3
Set the day, year and time as in
Step 2.
• The day of the week will
Step 2.
• The day of the week will
automatically appear when
you set the year.
you set the year.
• Press and hold down the
button to increase/ decrease
the minute by 10.
the minute by 10.
• After setting, the date and
You must set the date and time manually for timer
recordings.
recordings.
EXAMPLE: Setting the clock to "8:30 AM" October, 26
(SAT), 2002.
(SAT), 2002.
CHECK BEFORE YOU BEGIN
• Turn ON the TV and set to the video channel 3 or 4.
• Turn ON the VCR POWER button.
• Press the TV/VCR selector button to select the VCR
• Turn ON the VCR POWER button.
• Press the TV/VCR selector button to select the VCR
mode.
When a TV is connected with an audio/video cable, turn
the TV on and select the video input mode on the TV.
the TV on and select the video input mode on the TV.
LANGUAGE SELECTION
time will start functioning automatically.
4F22901A P14-19
11/5/2002, 3:11
15