Toshiba RD-XV48KE Manual De Usuario
38
EN
Settings for External Equipment
Video Colour System
When you record from external equipment or copy a
videotape to a HDD/DVD disc, you can set the format
Auto, PAL or SECAM.
videotape to a HDD/DVD disc, you can set the format
Auto, PAL or SECAM.
1
In stop mode, press [SETUP]. Select
“General Setting” using [
“General Setting” using [
U \ D],
then press [ENTER].
2
Select “Recording” using [
U \ D],
then press [ENTER].
3
Select “Video Colour System” using
[
[
U \ D], then press [ENTER].
4
Select “Auto”, “PAL” or “SECAM”
using [
using [
U \ D], then press [ENTER].
5
Press [SETUP] to exit.
Note
• During recording, when a signal other than PAL or
SECAM is detected, an error message appears on
the screen and recording will be paused. Recording
will be resumed when a PAL or SECAM signal is
detected.
the screen and recording will be paused. Recording
will be resumed when a PAL or SECAM signal is
detected.
Recording from External Equipment
Before recording from external equipment, see pages
20 to 21 for connection instructions.
20 to 21 for connection instructions.
1
Turn the TV and the unit on, and
select the input of the TV to which
the unit is connected.
select the input of the TV to which
the unit is connected.
If you are recording to the HDD, press [HDD].
If you are recording to a disc, press [DVD] and
insert a recordable disc.
If you are recording to a videotape,
press [VCR] and insert a recordable
videotape.
If you are recording to a disc, press [DVD] and
insert a recordable disc.
If you are recording to a videotape,
press [VCR] and insert a recordable
videotape.
2
Select the input terminal to which the
external equipment is connected
(AV1, AV2, or AV3).
external equipment is connected
(AV1, AV2, or AV3).
To use the input jacks on the rear of the unit,
select “AV1” or “AV2” position by pressing
[INPUT SELECT
select “AV1” or “AV2” position by pressing
[INPUT SELECT
F] or [PROG. G \ H].
To use the input jacks on the front of this unit,
select “AV3” position by pressing
[INPUT SELECT
select “AV3” position by pressing
[INPUT SELECT
F] or [PROG. G \ H].
3
Select a recording mode using
[REC MODE]. (See page 26.)
[REC MODE]. (See page 26.)
4
Press [I REC] on the unit to start
recording.
recording.
5
Press the [PLAY] button on the
external equipment.
external equipment.
6
Press [C STOP] (HDD/DVD) or
[A / C EJECT/STOP] (VCR) on the
unit to stop recording.
[A / C EJECT/STOP] (VCR) on the
unit to stop recording.
Note
• During recording, if a signal other than PAL is
detected (such as NTSC), recording is paused.
• If the external equipment is connected to AV2, the
picture of the external equipment will be output
except during the DVD playback of this unit. Turn off
the external equipment or press [DISPLAY] to
output the picture of this unit.
except during the DVD playback of this unit. Turn off
the external equipment or press [DISPLAY] to
output the picture of this unit.
• If you wish to make a recording from the DV input
(AV4) on the front panel, see instructions for this
starting on the following page.
starting on the following page.
Auto
: The video colour system will be set
automatically according to the
recording material.
recording material.
PAL
: The video colour system will be set to
PAL.
SECAM : The video colour system will be set to
SECAM.
Playback
Display
Video
Recording
Clock
Channel
DivX
HDMI
Reset All
Display
Video
Recording
Clock
Channel
DivX
HDMI
Reset All
General Setting
Auto Chapter
Recording Audio Select (XP)
Auto Finalise
Aspect Ratio (Video mode)
Recording Audio Select (XP)
Auto Finalise
Aspect Ratio (Video mode)
Bilingual Recording Audio
Video Colour System
External Input Audio
Make Recording Compatible
Video Colour System
Auto
PAL
SECAM
PAL
SECAM
HDD
HDD
D
DVD-R
VD-RW
W
DVD-RW
Video
DVD-RW
DVD-RW
VR
DVD-R
DVD-R
D
DVD+R
VD+RW
W
DVD+RW
D
DVD+R
VD+R
DVD+R
VCR
VCR
VCR
E3LG0ED_EN.book Page 38 Wednesday, April 30, 2008 11:52 AM