Toshiba W-415 Manual De Usuario

Program 1
(Start time)

Overlapped portion
(not recorded)

Program 2
(Start time)

Press

during timer recording mode.

The screen for confirming will appear.

Press. 

PROG. again to exit  from confirmation

page.

1) If the 

TIMER indicator is lit, press  both TIMER

to turn  it off, and then  turn  the VCR on by
pressing VCR

2) With steps 

 to 

, change the items.

To cancel a program, select the program you
want to cancel in step 

, and press 

The line is then cleared.

3) Press both  

TIMER  to return  to the timer

standby mode.

The  “--E--” ( Error ) indicator appears in the VCR
display if you press both 

TIMER when:

–– a cassette is not loaded.
–– the loaded cassette has no safety tab.

    –– timer recording is in progress .
In these cases, a recording can not be made.

By pressing  the  

POWER  button  on the  front

panel  of the VCR, it  will  cancel  the timer
recording  and go to standby.

P

M

P

M

• When a power failure has occurred, “--:--”

appears in the VCR display.  Since  the
programmed contents have been cleared,
reset the clock and timer programming.

• When power has  failed for a short time, the
   color of the current time display blinks.
   The programmed contents are  not affected.
   Reset the clock.

If two timer  programs overlap, the recording
start time of program 1 has priority over  the
recording off time of program 2.

W-415/ENG (24-27)

11/12/01, 13:34

27