Toshiba W808 Manual De Usuario

This VCR is equipped with Super VHS ET that makes it possible
to record with S-VHS picture quality on VHS cassettes.

Load a cassette with the safety tab attached.

Press 

TV/VCR so that the “VCR”

indicator appears in the VCR display.

Select a channel to record with
CHANNEL on the VCR, or CH/TRK
or 

number buttons on the remote

control.

If you see “L1” or “L2” in the VCR display, press 

I.SELECT so that the

channel number appears.
• If you record cable channels via the cable box, make the output

channel number of the cable box or “L1” appear, depending on your
connection. (See pages 11 – 13.)

Press 

SP/SLP to select the

recording tape speed.

SP: Suitable for general recording with
better picture and sound quality.
SLP: Suitable for tripling recording time, but with less picture and
sound quality than using the SP tape speed.

Press 

PROG. to display the MENU screen.

Select “SET UP” using 

FF or REW, and press ENTER.

Press 

STOP repeatedly to go to screen 2 of SET UP page to

select “S-VHS ET”, and set to “ON” using 

REW or FF.

“S-ET” indicator will appear on VCR display when 

“ON”

 is selected.

Press 

REC on the VCR, or

simultaneously press both 

REC on

the remote control.

The S-VHS ET recording mode will be
automatically selected.

Press 

STOP to stop recording.

Note
S-VHS ET does not work with S-VHS tapes.