TP-LINK TL-WDR 4300 Manual De Usuario
TL-WDR4300
N750 Wireless Dual Band Gigabit Router
- 53 -
Figure 4-36 WPA/WPA2 – Personal
•
PSK Password - You can enter ASCII characters between 8 and 63 characters or 8 to
64 Hexadecimal characters. The default password is the same with the default PIN code,
which is labeled on the bottom of the Router or can be found in Figure 4-31.
64 Hexadecimal characters. The default password is the same with the default PIN code,
which is labeled on the bottom of the Router or can be found in Figure 4-31.
•
Group Key Update Period - Specify the group key update interval in seconds. The
value should be 30 or above. Enter 0 to disable the update.
value should be 30 or above. Enter 0 to disable the update.
WPA /WPA2- Enterprise - It’s based on Radius Server.
•
Version
- you can choose the version of the WPA security on the drop-down list. The
default setting is
Automatic, which can select
WPA (Wi-Fi Protected Access) or WPA2
(WPA version 2) automatically based on the wireless station's capability and request.
•
Encryption -
You can select either
Automatic, or TKIP or AES.
Note:
If you check the
WPA/WPA2-Enterprise r
adio button and choose TKIP encryption, you will
find a notice in red as shown in Figure 4-37
Figure 4-37 WPA/WPA2 - Enterprise
•
Radius Server IP - Enter the IP address of the Radius server.
•
Radius Port - Enter the port number of the Radius server.
•
Radius Password - Enter the password for the Radius server.
•
Group Key Update Period - Specify the group key update interval in seconds. The
value should be 30 or above. Enter 0 to disable the update.
value should be 30 or above. Enter 0 to disable the update.
WEP - It is based on the IEEE 802.11 standard. If you check this radio button, you will find a
notice in red as show in Figure 4-38.
notice in red as show in Figure 4-38.