TP-LINK TL-SG3424P Manual De Usuario

 

117

 

QoS (Quality of Service) function is used to optimize the network performance. It provides you with 

network service experience of a better quality. 

The qos command is used to configure CoS (Class of Service) based on port. 

To return to the default configuration, please use no qos command. 

qos cos-id

 

  ——  The priority of port. It ranges from 0 to 7, which represent CoS0, 

CoS1, CoS2, CoS3, CoS4, CoS5, CoS6, CoS7 respectively. By default, the 

priority is 0. 

Interface Configuration Mode（interface ethernet / interface range ethernet） 

Port priority is one property of the port. When the port priority is specified, the 

data will be classified into the egress queue based on the CoS value of the 

ingress port and the mapping relation between the CoS and TC in IEEE 802.1P. 

Configure the priority of port 5 as 3: 

 interface ethernet 5 

3 

The  qos dot1p config command is used to configure the mapping relation 

between IEEE 802.1P Priority and Egress Queue. To return to the default 

configuration, please use no qos dot1p config command. IEEE 802.1P gives 

the Pri field in IEEE 802.1Q tag a recommended definition. This field is used to