TP-LINK TL-SG3424P Manual De Usuario

 

140

 

Create a MAC ACL whose ID is 20: 

20 

The  acl rule mac-acl command is used to add MAC ACL rule. To delete the 

corresponding rule, please use no acl rule mac-acl command. MAC ACLs 

analyze and process packets based on a series of match conditions, which can 

be the source MAC addresses, destination MAC addresses, VLAN ID, and 

EtherType carried in the packets. 

 {acl-id} {rule-id} [op { discard | permit }] [[smac source-mac] 

{smask source-mac-mask}] [[dmac destination-mac] {dmask 

}] [vid vlan-id] [type ethernet-type] [pri user-pri] [tseg 

] 

 {acl-id} {rule-id} 

  —— The desired MAC ACL for configuration. 

  ——  The rule ID. 

op  ——  The operation for the switch to process packets which match the rules. 

There are two options, discard and permit. Discard means discarding packets, 

and permit means forwarding packets. By default, the option is permit. 

  ——  The source MAC address contained in the rule. 

  —— The source MAC address mask. It is required if you 

typed the source MAC address. 

  ——  The destination MAC address contained in the rule. 

  ——  The destination MAC address mask. It is required 

if you typed the destination MAC address. 

  ——  The VLAN ID contained in the rule, ranging from 1 to 4094. 

  —— EtherType contained in the rule, in the format of 4-hex 

number. 

  —— The user priority contained in the rule, ranging from 0 to 7. By 

default, it is not limited. 

  —— The time-range for the rule to take effect. By default, it is