TP-LINK TL-SG3424P Manual De Usuario

 

191

 

Global Configuration Mode 

Specify Hold Multiplier as 5: 

5 

The  lldp timer command is used to configure the parameters about 

transmission. To return to the default configuration, please use no lldp timer 

command. 

lldp timer tx-interval tx-interval 

lldp timer tx-delay tx-delay 

lldp timer reinit-delay reinit-delay 

lldp timer notify-interval notify-interval 

lldp timer fast-count fast-count 

no lldp timer tx-interval 

no lldp timer tx-delay 

no lldp timer reinit-delay 

no lldp timer fast-count 

  ——  Configure the interval for the local device to transmit LLDPDU 

to its neighbors. By default, it is 30 seconds. 

tx-delay  ——

  Configure a value from 1 to 8192 in seconds to specify the time 

for the local device to transmit LLDPDU to its neighbors after changes occur so 

as to prevent LLDPDU being sent frequently. By default, it is 2 seconds. 

reinit-delay  ——

 This parameter indicates the amount of delay from when 

LLDP status becomes "disable" until re-initialization will be attempted. The 

default value is 3. 

  ——  Specify the interval of Trap message which will be sent from 

local device to network management system. By default, it is 5 seconds. 

fast-count  — —

 When the port's LLDP state transforms from Disable (or