Britax Roundabout Manual De Usuario

IMPORTANT:

Britax recommends that the Versa-

Tether

be used at all times. Using the tether will

improve the stability of the child seat and reduce the

risk of injury. Check your vehicle owner’s manual for

approved tether anchor locations.

Place the child seat forward-facing on the

vehicle seat.

Child seat may be in upright or recline position. See

Recline Adjustment on page 30.

If the vehicle is equipped with an approved

tether anchor for the chosen seating position,

remove the Versa-Tether

from the pouch and place it up and

over the child seat back.

Pull the vehicle belt out and thread it through the forward-

facing belt path (Fig. B).

Verify that the vehicle belt is not twisted and buckle (Fig. C).

Push the child seat firmly into vehicle seat while tightening the

vehicle belt.

•

Installation: Forward-Facing

Lap-Belt Installation

Figure A illustrates a typical forward-facing, lap-belt

installation.

When not in use, always store the LATCH connectors

in storage slots. See page 30.

•

If the vehicle is equipped with an approved tether anchor,

attach the Versa-Tether

hook to an approved tether anchor.

Remove all slack from tether to secure. Store excess webbing in

the tether pouch. See pages 25 – 28.

Verify that the vehicle belt is tight, locked, and child seat is

secure.

The child seat is secure when it cannot be moved front-to-back or side-to-

side more than 1 inch (2.5 cm.) at the belt path.

Removal

If connected, disconnect the Versa-Tether

from the tether

anchor.

Press the red release button on the vehicle belt buckle and pull

the vehicle buckle from the child seat belt path.

•

WARNING!

This child seat must not

be used forward-facing for children

less than one year of age OR weighing less

than 20 pounds.

Forward-Facing