Britax Roundabout Manual De Usuario

Child Seat Functions

Storing the LATCH Connectors

When the LATCH connectors are not in use, lift

the child seat cover to access LATCH storage

slots (Fig. A). Fold each end of the LATCH

strap and slide each LATCH connector into the

adjacent slots.

NOTE:

Child seats are shipped from Britax with

LATCH connectors in the storage slots.

Recline Adjustment

Pull the recline handle then slide the child seat

shell into the desired position. (Fig. B) Release

the recline handle and verify the child seat has

locked into position.

NOTE:

It will be necessary to loosen the tether,

vehicle seat belt, and/or LATCH strap before

adjusting the recline position. The tether, vehicle

seat belt, and/or LATCH strap must be properly re-

tightened after adjusting the recline position.

Chest Clip

Fastening the Chest Clip

Fasten the chest clip by pushing the two halves

together until a positive click is heard (Fig. C).
Releasing the Chest Clip

Squeeze the middle tab together and pull apart

the two pieces (Fig. D).
Adjusting the Chest Clip

Slide chest clip up or down on harness so it is positioned at the

middle of the child’s chest, level with the child’s armpits.

Harness Buckle

Fastening the Harness Buckle

Hold the harness buckle with one hand. Use

the other hand to insert one buckle tongue at a

time into the harness buckle (Fig. E).

Proper connection is confirmed with a positive

click after inserting each buckle tongue.
Releasing the Harness Buckle

Brace the rear of the harness buckle with one

hand. Press the release button and slide both

tongues to remove from the buckle (Fig. F).

IMPORTANT:

Periodically clean the harness buckle

to ensure safe operation. See page 37.

x 2