Britax CS Manual De Usuario

30

31

Storing the LATCH Connectors
When the LATCH connector is not in use, lift the 

cover to access the LATCH storage slots (Fig. A). 

Fold the LATCH adjuster and the connector, then 

slide each set into the adjacent slot.

NOTE: Child seats are shipped from Britax with the 

Recline Adjustment
Pull the recline handle (Fig. B) then slide 

the child seat shell into the desired position. 

Release the recline handle, then verify the child 

seat has locked into position.

a

b

c

Chest Clip
Fastening the Chest Clip
Fasten the chest clip by pushing the two halves 

together until a positive click is heard (Fig. D).
Releasing the Chest Clip 

Squeeze the middle tabs together (Fig. E).

1 

Pull the two pieces apart.

2 
Adjusting the Chest Clip

Slide the chest clip up or down (Fig. F) on 

1 

the harness so it is positioned at the middle 

of the child’s chest, level with the child’s 

armpits.
Slide the HUGS

2 

 chest pads and comfort 

pads to a comfortable location for the child.

NOTE: It will be necessary to loosen the tether, 

Infant Body Pillow
The Infant Body Pillow is designed to provide better fit and comfort for 

infants using this child seat. For additional side support, fold the side 

flaps inward (Fig. C).

NOTE: Remove the Infant Body Pillow after child can sit comfortably in the 

d

e

f

WARNING! 

HUGS

™

  chest  pads 

must  be  installed  for  forward-facing  use. 

Removal of HUGS is optional only for rear-

facing use.

WARNING!