Nikon F6 Manual De Usuario
163
Flash Photography
3
Set the flash sync mode.
4
Set TTL-BL.
• Set the power switch of the Speedlight to ON and set the flash mode to
TTL auto flash.
5
Check the display in the LCD panel.
• Confirm that the indicator
(SB-800) or
(SB-600) for i-TTL
Balanced Fill-Flash appears in the LCD panel. If this indication does not
appear in the LCD panel, press the MODE button until it appears.
appear in the LCD panel, press the MODE button until it appears.
6
Compose picture, focus and confirm the indication in the viewfinder.
• Lightly press the shutter release button and confirm the in-focus / indicator
and ready-light indicator fi appears in the viewfinder.
7
Confirm the flash shooting distance range and shoot.
• If the ready-light blinks approx. 3 sec. after full flash output, underexposure
may have occurred. Check the focus distance, aperture or flash shooting
distance range and shoot again.
distance range and shoot again.
• When using a Speedlight, make sure to read its instruction manual as well.
CSM e1: Auto FP High-Speed Sync can be set, or 1/60 to 1/250 sec. can be
selected as the fastest limit for the sync shutter speed (
selected as the fastest limit for the sync shutter speed (
x
104).
CSM e2: 30 to 1/60 sec. can be selected as the slowest limit for the sync
shutter speed in Programmed Auto or Aperture-Priority Auto (
shutter speed in Programmed Auto or Aperture-Priority Auto (
x
104).
P930_En 04.10.19 7:19 PM Page 163