Schneider Electric 66846 Manual De Usuario
Network
Management Card
User Manual
Network Management Card
– User Manual
34003676EN/HA
Page
22/81
3.2.6.1 Source 2 input measurement
3.2.6.2 Source 2 input measurement
3.2.7 UPS Control
Click on the “UPS Control” section in the menu.
If the UPS is not compatible with this function, a warning message is sent to the user.
UPS configuration may also prevent the commands from being properly run. Read the UPS manual for more
information.
If the UPS is not compatible with this function, a warning message is sent to the user.
UPS configuration may also prevent the commands from being properly run. Read the UPS manual for more
information.
This page enables triggering of
startup and shutdown sequences
for the UPS main output
The status of output is displayed by a symbol associated with the Off label (red symbol) or Powered (green
symbol).
symbol).
Source 2 current
Source 2 voltage Phase / Phase
Source 2 frequency
Source 2 neutral current
(if wiring 3 phases + neutral)
(if wiring 3 phases + neutral)
Source 1 current
Source 1 voltage Phase / Phase
Source 1 neutral current
(if wiring 3 phases + neutral)
(if wiring 3 phases + neutral)
Source 1 frequency